Extra Socket Installation in Montrose
Put power where you actually need it. James checks the existing circuit and the position you have in mind before he installs additional sockets.
Call 01674 900550James answers · 24/7 for emergencies- Local, Montrose based electrician
- Circuit assessed before a socket is added
- Tested and certified for the work
- Costs agreed before work begins
18th EditionBS 7671 Qualified
City & Guilds2382-22, Level 3
Fully InsuredFor Electrical Work- RAF ElectricianElectrical Engineer
Ex-Retained FirefighterFire & Rescue Service

We Add Sockets in Montrose, Angus
Montrose Sparks is James Leslie, based in Montrose. Older cottages and terraces in the town were wired with far fewer sockets than a household uses now, and he adds them in homes across DD10 and the approximate 40-mile radius he covers.
James does the assessment, the installation and the test records. Sockets for a new kitchen or an outbuilding come under Kitchen Electrics & Cooker Installation and Garage, Shed & Hot Tub Wiring. Where the existing board is part of the assessment, he explains any consumer unit work before the sockets are agreed.
5/5 on Google Reviews
“He took great care over the work (even used a spirit level to make sure the cooker was sitting right!) and was very reasonably priced. We are new to the area and struck lucky finding a reliable, responsive electrician.”
“Great service, fast response and problem fixed quickly”
“Great service highly recommended.”
“Jamie arrived within 15 minutes of my call and had the power back on about 10 minutes later.”
“James was very polite and sent over the quote immediately after the call and came out the same day in the early evening.”
“He couldn't of been more helpful and still only took what he quoted for, even though it was a bigger job than expected. Definitely recommend.”
“Arrived within an hour of my call, as he said he would. Fixed the problem same afternoon, and rate was extremely reasonable!”
“They also give decent price for the job and the work done will be using James again, he is also very polite and very helpful too me.”
“Fast response during a weekend, put in a temporary fix so we got power back. Excellent service.”
“Very professional and courteous. Highly recommend him.”
“James answered my call late at night and went to my property to investigate even though I had never used him before.”
Why Choose Montrose Sparks for Extra Sockets?
- Montrose Sparks installs extra sockets across Montrose, Angus
Additional sockets in bedrooms, living rooms, offices or other suitable locations. James works from Montrose and covers an approximate 40-mile radius. Small jobs are welcome.
- Work is carried out to BS 7671 by an 18th Edition qualified electrician
James inspects and tests the altered circuit and supplies the appropriate records for the work.
- You deal directly with James Leslie, not a call centre
James has 40 years of electrical engineering experience and is a former RAF electrical engineer and former retained firefighter. He explains the job clearly and agrees the cost before work begins.
- Montrose Sparks is fully insured and locally based
James holds public liability insurance for work in domestic, commercial and agricultural properties. Costs are agreed before any work begins.

Position and supply
Can You Add a Socket Anywhere in a Room?
The location must be suitable and the supply arrangement needs assessment. Extra outlets can make a room more practical, but their position and supply must suit the equipment you intend to use. James assesses the existing circuit before discussing additional sockets in bedrooms, living rooms, offices or other suitable locations.
Circuit capacity
Whether the existing circuit can take another outlet depends on what it already supplies and what you plan to plug in, which James checks before quoting.
Cable routes
The route from the nearest suitable point to the new position is agreed before work starts, whether the cable is chased in, surface-run or extended from an existing socket.
Access and finishes
Wall construction and what sits behind it affect how a socket is fitted and how much making good is needed afterwards.
Testing and records
Each new outlet is tested once connected and the results are recorded on the certificate appropriate to the work.
What Affects an Extra Socket Installation?
Access, wall construction and the existing circuit affect the installation and any making good. Confirm any supplied fittings before the visit so suitable equipment and any extra work can be allowed for.

Circuit Capacity & Cable Routes
Adding socket outlets does not increase the capacity of the existing circuit. The circuit arrangement, load, protective equipment and condition all influence the design. Higher-demand appliances may require a different supply rather than another outlet on the same circuit.

USB Sockets & Replacement Faceplates
USB outlets and decorative accessories vary in depth and compatibility. The existing backbox, wiring space and manufacturer requirements need checking. Confirm any supplied fittings before the visit so suitable equipment and any extra work can be allowed for.

Access, Finishes & Testing
Cable routes may involve lifting floorboards, surface trunking or chasing walls. Agree the route and responsibility for plastering or decorating before work starts. The altered circuit is inspected and tested, with the appropriate records supplied for the work.
How Much Do Extra Sockets Cost?
Quote agreed after assessment. The equipment, access, investigation needed and extent of installation or repair affect the price. James explains the proposed work and any additional costs before you agree to proceed.
- Socket installationNumber and position of sockets, cable routes and suitability of the existing installation. Quoted for the proposed layout.
- £90–£360+Per standard additional socket
Indicative guide prices. The final scope and cost are agreed before work begins. Where the existing circuit or consumer unit turns out to need attention before a socket can be added, James explains the findings and agrees any additional work with you before proceeding.
What Does Adding a Socket Involve?
Adding a socket is a small job, but it is still an alteration to a circuit, so it is planned, tested and recorded like one:
- 1
Agree positions and what will be plugged in
Mark where each socket is wanted and say what will use it, so the position and the supply suit the equipment.
- 2
Check the existing circuit and consumer unit
The circuit that would feed the new socket is checked for its arrangement, condition, load and protection, along with the board it is fed from.
- 3
Run the cable
The cable is chased into the wall, run in surface trunking or extended from an existing point, following the route agreed with you.
- 4
Fit the back box and faceplate
The back box is fixed, the cable terminated and the faceplate fitted, with any USB or decorative accessory checked for depth and compatibility first.
- 5
Test and certify
The altered circuit is tested and the results recorded on the certificate appropriate to the work before the socket is put into use.
Where the check finds the existing board cannot safely take the addition, James explains the options, including a consumer unit upgrade, before any socket work is agreed.
On completion
What you are left with
The paperwork depends on whether the socket was added to an existing circuit or fed from a new one.
Minor Electrical Installation Works Certificate
Issued where a socket is added to, or altered on, an existing circuit. It records the work carried out and the test results for that circuit.
Electrical Installation Certificate (EIC)
Issued where a new circuit is run from the consumer unit to feed the sockets. Any applicable building warrant or approved certification requirements are assessed separately.
Test Results
The readings taken on the altered or new circuit, kept with the certificate for your property records and for any future inspection.
Extra Sockets Across Montrose, Angus
Extra sockets, USB outlets and replacement faceplates for homes, rentals and business premises. James is based in Montrose, Angus, Scotland, and covers the DD10 postcode district, the Angus towns and the Mearns within an approximate 40-mile radius. Give him your postcode to confirm availability.
- Montrose and DD10The town, Ferryden and Hillside, and up the coast to St Cyrus. Our base, so usually the quickest to arrange.
- Brechin and ForfarHomes, rentals and business premises across the Angus towns.
- ArbroathAdditional sockets and replacement faceplates, including surrounding rural properties.
- Laurencekirk and InverbervieEnquiries welcome for houses, flats and rented properties.
- Elsewhere in Angus and the MearnsDundee and Stonehaven are inside the approximate 40-mile service area. Call with your postcode to check coverage.
Frequently Asked Questions About Extra Sockets
Can’t see your question?
James answers the phone himself and will tell you straight away whether he can help.
Call 01674 900550Can you add a socket anywhere in a room?
The location must be suitable and the supply arrangement needs assessment. James will explain cable routes, access requirements and any restrictions before quoting.
Can I add a socket to an existing ring?
Often, but it depends on the condition of the circuit and what it already supplies, so James checks the circuit first. Where the existing ring is in poor condition or already heavily loaded, another outlet on it may not be the right answer and a different supply may be suggested instead.
Can you spur off an existing socket?
In many cases a new socket can be fed from an existing one nearby, which usually keeps the cable run short. Whether that is suitable depends on how the existing socket is itself fed and on the arrangement of the circuit, so it is confirmed during the check rather than assumed.
Do I need a certificate for a new socket?
You should be given one. A socket added to an existing circuit is recorded on a Minor Electrical Installation Works Certificate, and a socket fed from a new circuit is recorded on an Electrical Installation Certificate. James tests the work and supplies the certificate appropriate to it.
Can you fit sockets with USB ports?
Yes, as a replacement faceplate or as part of a new socket. USB outlets and decorative accessories vary in depth and compatibility. The existing backbox, wiring space and manufacturer requirements need checking. Confirm any supplied fittings before the visit so suitable equipment and any extra work can be allowed for.
How many sockets can I add to a circuit?
There is no fixed number. It depends on the arrangement, condition and protective device of the circuit, and on what it already supplies, so the existing circuit is assessed before more sockets are proposed. Adding socket outlets does not increase the capacity of the existing circuit.
Will adding sockets need my fuse box changed?
Not usually, but it can. If the existing consumer unit is in poor condition, lacks suitable protection for the circuit, or has no room for a new circuit where one is needed, James explains that before the socket work is agreed. Where the board is suitable, the sockets are added and the board is left as it is.
Get your extra sockets quote
Send your address, the rooms and positions you have in mind and what you plan to plug in. James assesses the existing circuit before he confirms a price.
James aims to reply within one hour, 8am–6pm.