Indoor & Outdoor Lighting Installation in Montrose
Installation of indoor decorative lighting, LED spotlighting, outdoor garden illumination and security floodlights in Montrose and across Angus. Speak to James Leslie directly about changing the way your home or premises is lit.
Call 01674 900550James answers · 24/7 for emergencies- Replacement fittings and LED downlights
- Outdoor garden and security lighting
- Alterations tested and certified
- Clear quotes agreed before work starts
18th EditionBS 7671 Qualified
City & Guilds2382-22, Level 3
Fully InsuredFor Electrical Work- RAF ElectricianElectrical Engineer
Ex-Retained FirefighterFire & Rescue Service

Indoor & Outdoor Lighting Across Montrose, Angus
Montrose Sparks is James Leslie, based in Montrose. Lighting jobs in the town run from a new pendant in a High Street flat to floodlights on a house facing the Links, and outdoor fittings near the sea need to be chosen for the weather. He covers DD10 and an approximate 40-mile radius.
James takes on anything from a single pendant replacement to a full run of downlights or a garden power run. Under-cabinet lighting is often fitted along with kitchen electrics, and outdoor runs along with garage, shed and hot tub wiring. A single faulty fitting or switch is one of the small electrical repairs he does.
5/5 on Google Reviews
“He took great care over the work (even used a spirit level to make sure the cooker was sitting right!) and was very reasonably priced. We are new to the area and struck lucky finding a reliable, responsive electrician.”
“Great service, fast response and problem fixed quickly”
“Great service highly recommended.”
“Jamie arrived within 15 minutes of my call and had the power back on about 10 minutes later.”
“James was very polite and sent over the quote immediately after the call and came out the same day in the early evening.”
“He couldn't of been more helpful and still only took what he quoted for, even though it was a bigger job than expected. Definitely recommend.”
“Arrived within an hour of my call, as he said he would. Fixed the problem same afternoon, and rate was extremely reasonable!”
“They also give decent price for the job and the work done will be using James again, he is also very polite and very helpful too me.”
“Fast response during a weekend, put in a temporary fix so we got power back. Excellent service.”
“Very professional and courteous. Highly recommend him.”
“James answered my call late at night and went to my property to investigate even though I had never used him before.”
Why Choose Montrose Sparks for Your Lighting Installation?
- Montrose Sparks installs indoor and outdoor lighting across Montrose, Angus
Indoor decorative lighting, LED spotlighting, outdoor garden illumination and security floodlights for homes and commercial properties. James works from Montrose and covers an approximate 40-mile radius.
- Work is carried out to BS 7671 by an 18th Edition qualified electrician
Every fitting, switch and outdoor cable run is installed to the 18th Edition wiring regulations. That applies to a single pendant replacement as much as to a new run of recessed downlights.
- You deal directly with James Leslie, not a call centre
The person you speak to is the person who turns up. James served as an RAF electrical engineer and as a retained firefighter, and has 40 years of electrical engineering experience across military, municipal and private sectors.
- Montrose Sparks is fully insured and locally based
Public liability insurance is in place for domestic, commercial and agricultural properties. Costs are agreed before any work begins.

Before you start
Do I Need an Electrician to Change a Light Fitting?
A like-for-like swap of a light fitting is small work, but it still means isolating the right circuit and connecting the new fitting correctly, and older ceiling roses often carry more cables than a new fitting has terminals for. Adding new light positions, cutting in downlights or running lighting outdoors is an alteration to the installation: it is planned, tested and certified rather than simply wired up. Send James a photo of the fitting or the room and he can tell you which applies.
A like-for-like replacement
Swapping a pendant or wall light for a similar fitting on the existing wiring. Fitting type, ceiling height and the condition of the existing wiring affect the price.
New positions or a run of downlights
Cutting recessed downlights into a ceiling or adding new light points means new cabling in the ceiling void, so the altered circuit is tested and recorded on a certificate.
Outdoor and security lighting
Outdoor fittings need a suitable cable route, weatherproof connections and protection appropriate to the circuit. A dedicated outdoor circuit is treated as new work and certified accordingly.
Dimmers, sensors and controls
Swapping a switch for a dimmer or adding a PIR sensor is often straightforward, but the control has to be matched to the fitting and the load. James checks compatibility before anything is fitted.
Expert Interior & Exterior Lighting Solutions
Proper lighting enhances home aesthetics, improves security, and reduces energy consumption. We handle everything from replacing delicate interior pendants to installing weatherproof outdoor lighting arrays.

Indoors
Indoor Lighting & Energy-Efficient LEDs
Installing recessed LED downlights, dimmable ambient lighting, under-cabinet kitchen lighting, and decorative light fittings for living rooms, hallways, and staircases.
Fitting type, ceiling height and the condition of the existing wiring set the price of a replacement; joist direction, ceiling access and dimming control wiring set the price of a run of downlights. Where fittings are supplied, James checks they suit the position and the control before fitting them.
Best when: you are replacing fittings on existing wiring, or want a room lit evenly by recessed downlights rather than a single pendant.

Outdoors
Outdoor Garden & Security Lighting
Fitting IP65/IP66 weatherproof outdoor lanterns, PIR motion-sensor security floodlights, driveways lights, and armoured cable (SWA) garden power runs.
Outdoor fittings are chosen for the position: a sheltered porch, an exposed gable wall and a fitting at ground level do not need the same rating or mounting. Cable routing, wall mounting height and PIR sensor setup affect the price, and a garden power run can be planned in the same visit.
Best when: you want a driveway, path or entrance lit, or a sensor floodlight covering the approach to the house or an outbuilding.
Both are quoted the same way: the room locations or mounting position, whether fittings are supplied and how you want the lights controlled. The cost is agreed before work starts.

Pendant and replacement fittings
Like-for-like swaps and decorative fittings for living rooms, hallways and staircases, on the existing wiring where it is in suitable condition.

Recessed LED downlights
Cut into the ceiling on a planned layout, with drivers and dimming where wanted. Joist direction and ceiling access set what is possible.

Outdoor floodlight with sensor
A PIR motion-sensor floodlight on a wall or outbuilding, with the sensor range and timer set for the position.
How Much Does Lighting Installation Cost?
A standard light fitting replacement is £60 – £150+, an outdoor security floodlight installation £120 – £300+, and a run of 6–10 recessed LED downlights £250 – £650+. Fitting type, ceiling access and cable routing affect the price, and the cost is agreed before work starts.
- Standard Light Fitting ReplacementFitting type, ceiling height, existing wiring condition. List room locations and whether fittings are supplied.
- £60 – £150+Typical replacement
- Outdoor Security Floodlight InstallationCable routing, wall mounting height, PIR sensor setup. Describe mounting location and power access.
- £120 – £300+Typical wall-mounted installation
- Recessed LED Downlight Installation (6–10 Fittings)Joist direction, ceiling access, dimming control wiring. Assessed based on room dimensions and ceiling access.
- £250 – £650+Typical room, 6–10 fittings
Indicative guide prices. The final scope and cost are agreed before work begins.
What Does a Lighting Installation Involve?
From a single replacement fitting to a run of downlights or an outdoor circuit, the job follows the same order:
- 1
Plan the positions and controls
Agree where each fitting goes, which switch, dimmer or sensor controls it and whether the fittings are supplied. For downlights this means a ceiling layout that works around joists and pipework; for outdoor lighting, the mounting position and where the cable can run.
- 2
Isolate the circuit
The lighting circuit is switched off at the consumer unit and proved dead before any fitting, switch or cable is touched.
- 3
Run the cables and cut the positions
New cabling is routed through the ceiling void or along the outdoor route, downlight holes are cut to the planned layout and outdoor cable is protected to suit its position.
- 4
Fit the fittings, drivers and switches or sensors
Fittings are mounted and connected, LED drivers and dimmers matched to the lamps, and PIR sensors set for range and timing.
- 5
Test and certify
The altered or new circuit is inspected and tested, the results are recorded on the appropriate certificate and the paperwork is handed over with the manufacturer instructions.
Dimming, timers and app control can be planned as part of the same visit; see smart home controls.
On completion
What you are left with
The paperwork depends on whether the work altered an existing circuit or added a new one.
Minor Electrical Installation Works Certificate
For replacement fittings, new light points and other alterations to an existing lighting circuit. It records the work carried out and the test results for the altered circuit.
Electrical Installation Certificate (EIC)
For a new circuit, which outdoor and garden lighting often is. It records the design, installation and test results for the new circuit. Any applicable building warrant or approved certification requirements are assessed separately.
Manufacturer data for fittings and drivers
The instructions and data sheets for the fittings, LED drivers, dimmers and sensors installed, so replacement lamps and compatible controls can be chosen later.
Lighting Installation Across Montrose, Angus
Long dark evenings for much of the year, farm tracks and driveways with no street lighting, and older cottages wired with few light points: a lot of the lighting work around Montrose and Angus starts there. James is based in Montrose, Angus, Scotland, and covers the DD10 postcode district, the Angus towns and the Mearns within an approximate 40-mile radius. Give him your postcode to confirm availability.
- Montrose and DD10The town, Ferryden and Hillside, and up the coast to St Cyrus. Our base, so usually the quickest to arrange.
- Brechin and ForfarHomes and commercial properties across the Angus towns.
- ArbroathIndoor fittings and outdoor lighting, including surrounding rural properties, farm tracks and driveways.
- Laurencekirk and InverbervieEnquiries welcome for houses, flats and rented properties.
- Elsewhere in Angus and the MearnsDundee and Stonehaven are inside the approximate 40-mile service area. Call with your postcode to check coverage.
Lighting Installation: Common Questions
Can’t see your question?
James answers the phone himself and will tell you straight away whether he can help.
Call 01674 900550Can I replace a light fitting myself?
It is safest to have it done by an electrician. A light fitting sits on a live circuit, and a replacement means isolating the right circuit at the consumer unit and proving it dead, then identifying which conductors do what at the ceiling rose: older loop-in wiring can have several cables in the rose that are not marked the way a new fitting expects. If a fitting has already been changed and the lights behave oddly, or a switch stays live, have it checked. James replaces fittings as part of small electrical repairs and tests the circuit afterwards.
How many downlights does a room need?
There is no fixed number. It depends on the size and shape of the room, the ceiling height, what the room is used for and whether the downlights are the only light source or work alongside pendants, wall lights or under-cabinet lighting. Kitchens usually want an even spread over the work areas; living rooms often want fewer, dimmable fittings. James plans the layout with you around joists and pipework before any holes are cut.
Can outdoor lights be added to an existing circuit?
Sometimes, depending on the circuit and what is being added. A single porch or wall light can often be taken from a nearby lighting circuit if that circuit has the capacity and the right protection. A run of garden lights, a driveway or a floodlight some distance from the house is more usually put on its own circuit in armoured cable, protected for outdoor use. James checks the existing circuit and the route before recommending which.
What is the difference between IP-rated and standard fittings?
The IP rating describes how well a fitting keeps out dust and water. The first digit covers solids such as dust, the second covers water, and a higher number means better protection. A standard indoor fitting has little or no protection against water and is not suitable outdoors or in a wet position. Outdoor lanterns and floodlights are typically rated IP65 or IP66. James picks the rating for the position: a sheltered porch and an exposed wall or ground-level fitting do not need the same thing.
Can you fit dimmers to LED lights?
Usually, provided the lamps or fittings are dimmable and the dimmer is compatible with them. Not every LED lamp is dimmable, and a dimmer designed for older halogen or incandescent lamps can cause flicker, buzzing or a limited dimming range with LEDs. Where fittings run from a driver, the driver has to be dimmable too. James checks the fittings and specifies a matching dimmer, or advises on replacing lamps that will not dim.
Do outdoor security lights need a sensor or a switch?
Either, or both. A PIR sensor switches the light on when it detects movement and off again after a set time, which suits a driveway or the approach to a door. A switched light gives you control from indoors and suits a patio or a garden you sit in. Many floodlights can be wired so a switch overrides the sensor, and timers, dusk-to-dawn photocells and smart controls are further options. James wires whichever arrangement you choose and sets the sensor range and timing for the position.
Get your lighting quote
Send your address and the rooms involved, and say whether you are supplying the fittings. For outdoor lighting, describe where it will be mounted and where power can come from.
James aims to reply within one hour, 8am–6pm.