Smart Home & Heating Control Installation in Montrose
Installation and wiring for smart thermostats, automated lighting controls and smart home accessories in Montrose and across Angus. Speak to James Leslie directly about upgrading your heating controls safely.
Call 01674 900550James answers · 24/7 for emergencies- Matched to your boiler first
- Nest, Hive, Tado and Honeywell wired
- Receivers and C-wire wired correctly
- Costs agreed before work begins
18th EditionBS 7671 Qualified
City & Guilds2382-22, Level 3
Fully InsuredFor Electrical Work- RAF ElectricianElectrical Engineer
Ex-Retained FirefighterFire & Rescue Service

Smart Heating Controls Fitted in Montrose, Angus
Montrose Sparks is James Leslie, based in Montrose. He fits smart heating controls in homes across the town, from older houses near the High Street to newer ones at Borrowfield and in Hillside, and across DD10 and an approximate 40-mile radius.
James checks the boiler wiring, fits the receiver and thermostat and sets up the app. Electric heating without a boiler comes under Storage Heater Repairs & Replacement and Immersion Heater Electrical Repairs. Heating controls that have stopped working, as opposed to needing an upgrade, come under Electrical Repairs & Fault Finding.
5/5 on Google Reviews
“He took great care over the work (even used a spirit level to make sure the cooker was sitting right!) and was very reasonably priced. We are new to the area and struck lucky finding a reliable, responsive electrician.”
“Great service, fast response and problem fixed quickly”
“Great service highly recommended.”
“Jamie arrived within 15 minutes of my call and had the power back on about 10 minutes later.”
“James was very polite and sent over the quote immediately after the call and came out the same day in the early evening.”
“He couldn't of been more helpful and still only took what he quoted for, even though it was a bigger job than expected. Definitely recommend.”
“Arrived within an hour of my call, as he said he would. Fixed the problem same afternoon, and rate was extremely reasonable!”
“They also give decent price for the job and the work done will be using James again, he is also very polite and very helpful too me.”
“Fast response during a weekend, put in a temporary fix so we got power back. Excellent service.”
“Very professional and courteous. Highly recommend him.”
“James answered my call late at night and went to my property to investigate even though I had never used him before.”
Why Choose Montrose Sparks for Your Smart Thermostat Installation?
- Montrose Sparks installs smart heating controls across Montrose, Angus
Smart thermostats, automated lighting controls and smart home accessories for homes and rental properties. James works from Montrose and covers an approximate 40-mile radius.
- Work is carried out to BS 7671 by an 18th Edition qualified electrician
James wires 230V receivers, relay boxes and low-voltage thermostat controls correctly, without risking damage to your boiler’s circuit board.
- You deal directly with James Leslie, not a call centre
James has 40 years of electrical engineering experience and is a former RAF electrical engineer and former retained firefighter. A clear installation quote is agreed before work begins.
- Montrose Sparks is fully insured and locally based
Public liability insurance is in place for domestic, commercial and agricultural properties. Costs are agreed before any work begins.

Boiler compatibility
Will a Smart Thermostat Work With My Boiler?
It depends on your boiler type and the existing thermostat wiring, so the quote is prepared from your boiler model and existing thermostat details rather than assumed. Nest, Hive, Tado and Honeywell smart thermostats are wired to combi boilers, system boilers, or zoned heating circuits, and 230V receivers, relay boxes and low-voltage thermostat controls are wired correctly without risking damage to your boiler’s circuit board. These are the four things James checks before a thermostat is chosen.
Your boiler type
A combi boiler, a system boiler with a cylinder, and a zoned heating circuit are wired differently, so the receiver and its connections depend on which you have. The boiler make and model is the first detail to share.
Your existing thermostat wiring
A wired room thermostat, a wireless one or none at all changes what can be reused. C-wire and receiver wiring is done correctly, without risking damage to your boiler’s circuit board.
Single or multi-zone
One thermostat controlling the whole house is the simpler job. The number of heating zones and the motorized valve wiring affect the price, and a multi-zone setup is quoted after reviewing your heating system valve setup.
Smart TRVs
Smart TRVs are priced as part of a multi-zone smart heating control setup, alongside the number of heating zones and the motorized valve wiring. Whether they suit your radiators is assessed with the rest of the system.
Single Smart Thermostat or Multi-Zone Heating Control?
Smart thermostats allow you to control your heating remotely via smartphone, set automated schedules, and optimize energy usage to lower heating bills. The two setups below are priced separately, and which suits you depends on how your heating is piped and wired.

Option one
Single smart thermostat
Wiring Nest, Hive, Tado, and Honeywell smart thermostats to combi boilers, system boilers, or zoned heating circuits. Correctly wiring 230V receivers, relay boxes, and low-voltage thermostat controls without risking damage to your boiler’s circuit board.
One thermostat replaces the existing room thermostat or programmer and controls the whole house from the app. Share your boiler model and existing thermostat details.
Best when: one thermostat already controls the whole house and the existing wiring can be reused.

Option two
Multi-zone smart heating control
The number of heating zones, motorized valve wiring and smart TRVs affect the price. Quoted after reviewing your heating system valve setup.
Each zone gets its own control, either through motorised valves already in the airing cupboard or through smart TRVs on the radiators, so rooms can be heated on different schedules.
Best when: the heating is already zoned with motorised valves, or rooms are used at very different times and radiator-level control is wanted.
Smart Lighting & Automated Switches. Installing smart dimmer switches, app-controlled lighting relays, and outdoor automated lighting. Smart sockets and other smart home accessories are quoted in the same way, from the existing switch or socket wiring.

Smart thermostat
Replaces the existing room thermostat or programmer, with the receiver wired at the boiler.

Motorised zone valves
Where the heating is already split into zones, the valves are wired to the new controls.

Smart TRV
Radiator-level control priced as part of a multi-zone setup.
How Much Does Smart Thermostat Installation Cost?
A smart thermostat installation (Hive / Nest) is £80 – £220+ and a multi-zone smart heating control setup £250 – £600+. Boiler type, existing thermostat wiring and the number of heating zones affect the price, and the cost is agreed before work begins.
- Smart Thermostat Installation (Hive / Nest)Boiler type, existing thermostat wiring, single vs. multi-zone. Share your boiler model and existing thermostat details.
- £80 – £220+Typical single installation
- Multi-Zone Smart Heating Control SetupNumber of heating zones, motorized valve wiring, smart TRVs. Quoted after reviewing your heating system valve setup.
- £250 – £600+Typical multi-zone setup
Indicative guide prices. The final scope and cost are agreed before work begins.
What Does a Smart Thermostat Installation Involve?
Fitting a smart thermostat is a wiring job at the boiler as much as a gadget on the wall. This is what happens on the day:
- 1
Confirm the boiler type and existing thermostat wiring
James checks the boiler make and model, how the existing room thermostat or programmer is wired and whether the heating is zoned, and confirms the chosen thermostat suits that arrangement before anything is disconnected.
- 2
Isolate the boiler supply
The boiler and its controls are switched off and isolated at the fused spur or consumer unit, and proved dead, before any cover is removed.
- 3
Fit the receiver at the boiler and the thermostat on the wall
The receiver or relay box is wired into the boiler’s control terminals or wiring centre and the thermostat is fitted in its position, with a C-wire or a power supply provided where the thermostat needs one. Correctly wiring 230V receivers, relay boxes, and low-voltage thermostat controls without risking damage to your boiler’s circuit board.
- 4
Connect zone valves or smart TRVs for a multi-zone setup
Where the system is zoned, the motorised valves in the airing cupboard are wired to the new controls, or smart TRVs are fitted to the radiators and linked to the hub, so each zone can be scheduled on its own.
- 5
Power up, pair with the app and demonstrate
The supply is restored, the thermostat is paired with the receiver and the app, and the heating is called on and off to prove the boiler responds. James shows you the schedule and the manual override before leaving.
On completion
What you are left with
A smart thermostat is an alteration to the boiler’s control wiring, so it is recorded like any other electrical work. After the installation James leaves you with:
Minor Electrical Installation Works Certificate
Issued for the alteration to the existing boiler control circuit, recording the work carried out and the test results for that circuit.
Wiring notes for the heating controls
A note of how the receiver, thermostat and any zone valves or TRVs are connected at the boiler, so a heating engineer or a future replacement can follow what was done.
Product paperwork and settings
The manufacturer’s instructions and the app account details, with the schedule and any zone names set up as agreed at handover.
Smart Home & Heating Controls Across Montrose, Angus
Smart thermostats, multi-zone heating controls and smart lighting. James is based in Montrose, Angus, Scotland, and covers the DD10 postcode district, the Angus towns and the Mearns within an approximate 40-mile radius. Give him your postcode and boiler model to confirm availability.
- Montrose and DD10The town, Ferryden and Hillside, and up the coast to St Cyrus. Our base, so usually the quickest to arrange.
- Brechin and ForfarHomes, rentals and business premises across the Angus towns.
- ArbroathSmart thermostats and heating controls, including surrounding rural properties.
- Laurencekirk and InverbervieEnquiries welcome for houses, flats and rented properties.
- Elsewhere in Angus and the MearnsDundee and Stonehaven are inside the approximate 40-mile service area. Call with your postcode to check coverage.
Frequently Asked Questions About Smart Heating Controls
Can’t see your question?
James answers the phone himself and will tell you straight away whether he can help.
Call 01674 900550Will a smart thermostat save money?
It depends on how you heat the home now. Smart thermostats allow you to control your heating remotely via smartphone, set automated schedules, and optimize energy usage to lower heating bills, and the saving comes from the heating running less when nobody needs it. A home that already uses a well-set programmer will see less difference than one where the heating is left on all day. James sets the schedule up with you at handover so the controls are actually used.
Can I fit a Hive or Nest myself?
The wall thermostat is the easy part; the wiring at the boiler is where the risk is. The receiver connects to the boiler’s control terminals, and a wrong connection can damage the boiler. James handles the C-Wire & Receiver Wiring: Correctly wiring 230V receivers, relay boxes, and low-voltage thermostat controls without risking damage to your boiler’s circuit board.
Do I need a C-wire?
Some smart thermostats need a permanent power feed at the wall, often called a C-wire, and some are powered from the receiver or by battery. Whether yours needs one depends on the thermostat model and what wiring already runs to the existing thermostat position. C-Wire & Receiver Wiring: Correctly wiring 230V receivers, relay boxes, and low-voltage thermostat controls without risking damage to your boiler’s circuit board.
Can smart controls work with storage heaters or an immersion heater?
Sometimes, but they are different arrangements from a boiler. Storage heaters charge on an off-peak supply and an immersion heater is a heating element on its own circuit, so a boiler thermostat is not the right control for either. What can be fitted depends on the heater, the tariff and the existing wiring, and James assesses it with the rest of the system.
Can you set up multiple zones?
Yes. A multi-zone smart heating control setup is quoted after reviewing your heating system valve setup, because the number of heating zones, motorized valve wiring and smart TRVs affect the price. Where the heating is already split with motorised valves each zone gets its own control, and where it is not, smart TRVs can give radiator-level control instead.
Do you install smart lighting and smart sockets?
Yes. Installing smart dimmer switches, app-controlled lighting relays, and outdoor automated lighting. Smart sockets and other smart home accessories are wired in the same way, and James confirms the existing switch wiring suits the chosen product before it is fitted.
Get your smart thermostat quote
Send your address, the boiler model, the details of your existing thermostat and the number of heating zones. James reviews the heating system before he confirms a price.
James aims to reply within one hour, 8am–6pm.