5/5 on Google Reviews

Agricultural & Farm Electrician in Montrose

Agricultural electrical maintenance, 3-phase power installations, barn wiring and equipment repairs for farms around Montrose, in rural Angus and in the neighbouring farming areas. Talk to James Leslie directly about keeping the farm running safely.

Call 01674 900550James answers · 24/7 for emergencies
  • Fittings built for wet, dusty, animal-occupied buildings
  • 3-phase supplies and motor starters
  • Fault finding to restore essential power
  • Costs agreed before work begins
James Leslie

Get your farm electrical quote

Emergency or out of hours? Call 01674 900550, 24/7.

No obligation. Costs are agreed before any work begins.

  • 18th EditionBS 7671 Qualified
  • City & Guilds2382-22, Level 3
  • Fully InsuredFor Electrical Work
  • RAF ElectricianElectrical Engineer
  • Ex-Retained FirefighterFire & Rescue Service
The Montrose Sparks van parked in Montrose

Farm Electrical Work Across Montrose, Angus

Montrose Sparks is James Leslie, based in Montrose. The town sits between two farming districts, with rural Angus on one side and the Howe of the Mearns on the other, and both are inside the approximate 40-mile radius he covers.

Farm buildings are wet, dusty and often full of animals. Fittings, cable protection and RCD protection are therefore chosen for the building, not copied from a house. Tell James which building the job is in, how it is reached and whether livestock will be in the shed while he works, because access and the distance between buildings affect the price. New heavy-duty supplies are covered under Three-Phase Electrical Work, dryer faults under Grain Dryer Electrical Faults, and a loss of power outside working hours under 24/7 Emergency Electrician.

5/5 on Google Reviews

★★★★★Google Review
“He took great care over the work (even used a spirit level to make sure the cooker was sitting right!) and was very reasonably priced. We are new to the area and struck lucky finding a reliable, responsive electrician.”
Donna NZVerified
★★★★★Google Review
“Great service, fast response and problem fixed quickly”
Jen JVerified
★★★★★Google Review
“Great service highly recommended.”
Lee DuncanVerified
★★★★★Google Review
“Jamie arrived within 15 minutes of my call and had the power back on about 10 minutes later.”
megan mcgregorVerified
★★★★★Google Review
“James was very polite and sent over the quote immediately after the call and came out the same day in the early evening.”
SamanthaVerified
★★★★★Google Review
“He couldn't of been more helpful and still only took what he quoted for, even though it was a bigger job than expected. Definitely recommend.”
Tammy CrockattVerified
★★★★★Google Review
“Arrived within an hour of my call, as he said he would. Fixed the problem same afternoon, and rate was extremely reasonable!”
Sarah DundasVerified
★★★★★Google Review
“They also give decent price for the job and the work done will be using James again, he is also very polite and very helpful too me.”
katieVerified
★★★★★Google Review
“Fast response during a weekend, put in a temporary fix so we got power back. Excellent service.”
Ian MilneVerified
★★★★★Google Review
“Very professional and courteous. Highly recommend him.”
BuckyVerified
★★★★★Google Review
“James answered my call late at night and went to my property to investigate even though I had never used him before.”
Mohan ThiagarajahVerified

Why Choose Montrose Sparks for Your Farm Electrical Work?

  • Montrose Sparks carries out agricultural electrical work across Montrose, rural Angus and Dundee

    Agricultural electrical maintenance, 3-phase power installations, barn wiring and equipment repairs for farms, estates and agricultural businesses. James works from Montrose and covers an approximate 40-mile radius.

  • Work is carried out to BS 7671 by an 18th Edition qualified electrician

    Heavy-duty installations are built to stand up to dust, moisture, livestock dampness, mechanical vibration and vermin damage, and planned to keep operational downtime to a minimum.

  • You deal directly with James Leslie, not a call centre

    The person you speak to is the person who turns up. James served as an RAF electrical engineer and as a retained firefighter, and has 40 years of electrical engineering experience across military, municipal and private sectors.

  • Montrose Sparks is fully insured and locally based

    Public liability insurance is in place for domestic, commercial and agricultural properties. A clear quote is agreed before work begins.

More about James
James carrying out an electrical inspection at a property
Heavy-duty installations built for dust, damp, vibration and vermin.

Farm buildings are different

Do Farm Buildings Need Different Electrics From a House?

Yes. A steading, cattle shed or grain store needs fittings, cable protection and RCD protection chosen for a wet, dusty, animal-occupied building, not the accessories a house is wired with. Agricultural electrical installations face harsh operational conditions—dust, moisture, livestock dampness, mechanical vibration, and vermin damage. We deliver durable, heavy-duty electrical solutions designed to withstand tough farm environments while minimizing operational downtime.

  • IP-rated fittings where it is wet or dusty

    Weatherproof IP-rated LED lighting, high-bay shed illumination, outdoor floodlighting and IP66 socket enclosures keep water, dust and wash-down spray out of the fitting. The rating is chosen for the building and how it is cleaned.

  • Mechanical protection for cables

    Cables in farm buildings are exposed to machinery, livestock, vibration and rodents, so they are run in armoured cable, conduit or trunking and fixed where they cannot be struck or chewed. Broken armours and damaged isolators are a common cause of the faults James is called to.

  • RCD protection for sockets and equipment

    Sockets in damp or corrosive conditions, outdoors or where water jets are used are of an appropriate type and protected by a residual current device (RCD). Where machinery trips a shared RCD, the circuit arrangement is looked at rather than the protection removed.

  • Livestock areas

    Cattle and other livestock are more sensitive to stray voltages than people, and damp, ammonia-laden air corrodes metalwork faster than in a house. Fittings, cable routes and earthing in livestock sheds are chosen and checked with the animals in mind.

Not sure what the building needs? Describe the shed, what runs in it and how it is used.

Signs a Farm Installation Needs Attention

Any of the following is a reason to have the installation looked at before it is relied on for another season. What is repaired and what is replaced depends on what is found once the circuits are inspected and tested.

  • Corroded or damaged fittings and cables

    Rusted socket enclosures, cracked light fittings, split cable sheaths or exposed armour are signs the installation is losing the protection it was designed with. Damp and ammonia in livestock buildings can corrode metalwork much faster than in a house, so a fitting that looks tired may already be letting water in.

  • Tripping when machinery starts

    A dryer, pump or auger that trips the board when it starts can point to a motor, starter or supply fault, or to protection that is not suited to the load. Leave it isolated and describe what trips and when, rather than resetting it repeatedly.

  • Rodent damage

    Chewed cable insulation in stores, lofts and voids exposes live conductors and is a recognised cause of faults and fires in farm buildings. Any sign of gnawing on cables needs the circuit checked before it is used again.

  • Overloaded extension leads and temporary wiring

    Extension leads run across yards, adaptors stacked in a workshop and temporary cables that have become permanent are a fire and shock risk. HSE advises providing enough socket outlets to keep the use of extension leads to a minimum and not overloading sockets with adaptors.

Call 01674 900550Isolate anything damaged if it is safe to do so and describe what you have found to James.

Robust Electrical Engineering for Farms & Estates

Three kinds of farm electrical work, from shed lighting and sockets to 3-phase machinery supplies and emergency repairs.

  • Weatherproof covered socket at a farm building

    Livestock Shed & Barn Electrical Wiring

    Weatherproof IP-rated LED lighting, high-bay shed illumination, outdoor floodlighting, and IP66 socket enclosures for cattle sheds, grain stores, and workshops.

  • James talking with a farmer outside a farm building

    3-Phase Power Supplies & Motor Starters

    Installing 3-phase distribution boards, direct-on-line (DOL) motor starters, isolators, and heavy-duty supplies for grain dryers, slurry pumps, feed augers, and workshop machinery.

  • James talking with a homeowner at an open garage

    Farm Safety Repairs & Emergency Fault Finding

    Locating ground faults, underground cable damage, broken armours, or damaged isolators quickly to restore essential power to agricultural operations.

How Much Does Farm Electrical Work Cost?

Prices depend on the distance between buildings, the type of 3-phase equipment and access, and for a lighting package the shed height, number of fittings and cable run lengths. All costs are agreed before work begins.

Farm Electrical Fault Finding & RepairDistance between buildings, 3-phase equipment type, access. Describe the machinery symptoms, building location, and urgency.
£80 – £500+Fault finding and repair
Barn / Shed High-Bay LED Lighting PackageShed height, number of fittings, cable run lengths. Quoted following an on-farm survey or site description.
Custom QuoteAfter survey or site description

Indicative guide prices. The final scope and cost are agreed before work begins.

Full pricing guide

How the job runs

What Does Farm Electrical Work Involve?

Whether it is a repair, a new supply or a lighting package, the job follows the same pattern, planned around the animals and the work of the farm to keep operational downtime to a minimum.

  1. 1

    Walk the buildings and agree what runs where and when

    James walks the steading with you, sees which building each item is in, how it is reached and what has to keep running. Work is planned around livestock and your operation so that feeding, milking, drying or pumping is interrupted as little as possible.

  2. 2

    Inspect and test the existing installation

    The board, cable routes, isolators and fittings are inspected and the affected circuits tested, so that a fault is traced to its cause and any damage the environment has done is found before new work is connected to it.

  3. 3

    Carry out the repair or the agreed installation

    Repairs are made or the new supply, starter, lighting or sockets installed using fittings suited to the building: IP-rated enclosures, armoured or protected cable and RCD protection where the conditions call for it.

  4. 4

    Test and certify

    Every circuit worked on is tested before it is put back into service, and the results are recorded on the certificate for the work.

  5. 5

    Hand over the records and note anything for later

    You get the certificate, test results and any photographs, plus a note of anything seen on the walk-round that is not urgent but worth planning for, so the next job is not a surprise.

HSE’s farm electrical safety guidance is that installations are checked periodically and repairs carried out by a competent electrician. Read the HSE guidance on electricity on farms.

On completion

What You Are Left With

Paperwork for the farm file, and for an insurer or assurance scheme where they ask for it.

  • Electrical Installation Certificate or Minor Works Certificate

    An Electrical Installation Certificate (EIC) for a new circuit, board or supply, or a Minor Electrical Installation Works Certificate for an addition or alteration to an existing circuit, confirming the work was tested to BS 7671. Any applicable building warrant or approved certification requirements are assessed separately.

  • Electrical Installation Condition Report

    Where a farm inspection is carried out rather than a repair or installation, the findings are recorded on an Electrical Installation Condition Report (EICR) with observations and limitations. An EICR records the condition of the installation; it is not a certificate for new work.

  • Test results and photographs

    The test results for each circuit worked on and photographs of what was found and what was done, kept with the certificate where required by your insurer or scheme.

Agricultural Electrical Services Across Montrose, Angus

James is based in Montrose, Angus, Scotland, and covers the DD10 postcode district, the Angus towns and the farms and estates of Angus and the Mearns within an approximate 40-mile radius. Say how the steading is reached, because rural access and the distance between buildings affect the price.

  • Montrose and DD10The town, Ferryden and Hillside, and up the coast to St Cyrus. Our base, so usually the quickest to arrange.
  • Brechin and ForfarFarms, estates and agricultural businesses across the Angus towns and the land between them.
  • ArbroathLivestock sheds, grain stores and workshops on the farms and rural holdings around the town.
  • Laurencekirk and InverbervieEnquiries welcome for farms and rural businesses around the city.
  • Elsewhere in Angus and the MearnsDundee and Stonehaven are inside the approximate 40-mile service area. Call with your postcode to check coverage.
Map of the Montrose Sparks service area: about 40 miles around Montrose, across Angus and the Mearns to DundeeNorth Sea10 mi20 mi30 mi40-MILE SERVICE AREABrechinForfarArbroathDundeeKirriemuirLaurencekirkCarnoustieStonehavenInverbervieMontrose

Inside the service area

Brechin

About 7 miles from Montrose, as the crow flies

Call 01674 900550

Frequently Asked Questions About Farm Electrical Work

Can’t see your question?

James answers the phone himself and will tell you straight away whether he can help.

Call 01674 900550
Do farm electrics need to be inspected regularly?

Regular inspection and testing is recommended, but there is no single interval set for farm buildings. HSE’s guidance is that installations are checked periodically and repairs carried out by a competent electrician, and that electrical equipment must be safe and properly maintained. Insurers and farm assurance schemes may ask for evidence of inspection, so check what yours requires. James inspects and tests the installation, records the findings and suggests when it should next be looked at.

Can you work while the shed has livestock in it?

Usually, yes. The work is planned around the animals and your operation: which pens are in use, when feeding and milking happen and what has to keep running, so that operational downtime is kept to a minimum. Where a circuit has to be isolated while stock are in the building, James agrees the timing with you first. Tell James whether livestock will be in the shed when you describe the job.

What fittings are used in livestock sheds?

Fittings chosen for a wet, dusty, corrosive building: weatherproof IP-rated LED lighting, high-bay shed illumination, outdoor floodlighting and IP66 socket enclosures, with cables run in armoured cable, conduit or trunking and fixed out of reach of animals and machinery. Sockets in damp conditions are RCD-protected. The exact rating and route are chosen once James has seen the building and how it is cleaned.

Can you install three-phase for new machinery?

Yes. Montrose Sparks installs 3-phase distribution boards, direct-on-line (DOL) motor starters, isolators and heavy-duty supplies for grain dryers, slurry pumps, feed augers and workshop machinery. Whether the existing supply to the farm can carry the new load is checked first, and any change to the incoming supply is discussed with you before the work is quoted. See Three-Phase Electrical Work for the detail.

Do you do emergency farm call-outs?

Yes, subject to availability. Emergency calls are welcome 24/7, and farm safety repairs and emergency fault finding cover locating ground faults, underground cable damage, broken armours or damaged isolators quickly to restore essential power to agricultural operations. Call James with the building, the symptoms and what has stopped, and he will tell you when he can attend.

Will I get certificates for insurance?

You get the certificate for the work carried out: an Electrical Installation Certificate or Minor Works Certificate for repairs and installations, or an Electrical Installation Condition Report where an inspection has been done, with the test results and photographs where required by your insurer or scheme. Whether a particular document satisfies your insurer or assurance scheme depends on what they ask for, so check their requirements and tell James so the right paperwork is prepared.

Get your farm electrical quote

Describe the machinery symptoms, the building location and how urgent it is. Lighting packages are quoted following an on-farm survey or site description.

James aims to reply within one hour, 8am–6pm.

Tap to call 01674 900550
James Leslie

Get a free quote

Replies within an hour, 8am–6pm.

Emergency or out of hours? Call 01674 900550, 24/7.

No obligation. Costs are agreed before any work begins.