5/5 on Google Reviews

Grain Dryer Electrical Repairs in Montrose

Talk to James about an electrical fault on your grain drying equipment. The clearer the account of the symptoms and the equipment, the better he can plan an investigation.

Call 01674 900550James answers · 24/7 for emergencies
  • Local, Montrose based electrician
  • Supply, starters and controls investigated
  • Isolated and made safe before any work starts
  • Costs agreed before work begins
James Leslie

Get your grain dryer fault quote

Emergency or out of hours? Call 01674 900550, 24/7.

No obligation. Costs are agreed before any work begins.

  • 18th EditionBS 7671 Qualified
  • City & Guilds2382-22, Level 3
  • Fully InsuredFor Electrical Work
  • RAF ElectricianElectrical Engineer
  • Ex-Retained FirefighterFire & Rescue Service
The Montrose Sparks van parked in Montrose

Grain Dryer Electrical Faults in Montrose, Angus

Montrose Sparks is James Leslie, based in Montrose. The arable farms of Angus and the Howe of the Mearns lie on either side of the town, and dryers on both are inside the approximate 40-mile radius he covers.

Dryer faults are one part of the wider farm and steading electrics James covers, which include three-phase motor and supply work. If a fault happens outside normal hours, the 24/7 emergency line is there, subject to availability. A clear account of the symptoms and the equipment details helps him plan an investigation.

5/5 on Google Reviews

★★★★★Google Review
“He took great care over the work (even used a spirit level to make sure the cooker was sitting right!) and was very reasonably priced. We are new to the area and struck lucky finding a reliable, responsive electrician.”
Donna NZVerified
★★★★★Google Review
“Great service, fast response and problem fixed quickly”
Jen JVerified
★★★★★Google Review
“Great service highly recommended.”
Lee DuncanVerified
★★★★★Google Review
“Jamie arrived within 15 minutes of my call and had the power back on about 10 minutes later.”
megan mcgregorVerified
★★★★★Google Review
“James was very polite and sent over the quote immediately after the call and came out the same day in the early evening.”
SamanthaVerified
★★★★★Google Review
“He couldn't of been more helpful and still only took what he quoted for, even though it was a bigger job than expected. Definitely recommend.”
Tammy CrockattVerified
★★★★★Google Review
“Arrived within an hour of my call, as he said he would. Fixed the problem same afternoon, and rate was extremely reasonable!”
Sarah DundasVerified
★★★★★Google Review
“They also give decent price for the job and the work done will be using James again, he is also very polite and very helpful too me.”
katieVerified
★★★★★Google Review
“Fast response during a weekend, put in a temporary fix so we got power back. Excellent service.”
Ian MilneVerified
★★★★★Google Review
“Very professional and courteous. Highly recommend him.”
BuckyVerified
★★★★★Google Review
“James answered my call late at night and went to my property to investigate even though I had never used him before.”
Mohan ThiagarajahVerified

Why Choose Montrose Sparks for Grain Dryer Electrical Faults?

  • Montrose Sparks investigates grain dryer electrical faults across Montrose, Angus

    James investigates the electrical supply and the relevant controls within the agreed scope. He is based in Montrose and serves homes, farms and businesses across Angus and surrounding areas within approximately 40 miles.

  • Work is carried out to BS 7671 by an 18th Edition qualified electrician

    How the work can be done depends on the isolation arrangements, moving parts, dust and the operating environment. Do not bypass protective devices or safety interlocks to keep a dryer running.

  • You deal directly with James Leslie, not a call centre

    Your call goes to James Leslie in Montrose. He is a former RAF electrical engineer and former retained firefighter with 40 years of electrical engineering experience. Small jobs are welcome, and he explains the work clearly and agrees the cost before starting.

  • Montrose Sparks is fully insured and locally based

    The business carries public liability cover for domestic, commercial and agricultural properties. Costs are agreed before any work begins.

More about James
James carrying out an electrical inspection at a property
A fault indication alone does not confirm which component needs replacing.

Harvest and urgent faults

Can You Guarantee an Immediate Repair During Harvest?

No. Availability, diagnosis and parts affect repair times. Call to discuss the urgency and equipment details so James can explain what assistance is practical.

  • Fault finding on drying equipment

    Loss of power, a motor that will not start or an intermittent control fault can interrupt drying operations. James investigates the electrical supply and relevant controls within the agreed scope.

  • Motor starters and controls

    The condition of connections, protective equipment and control circuits may need checking alongside the incoming supply. A fault indication alone does not confirm which component needs replacing.

  • Safe access around dust and machinery

    Isolation arrangements, moving parts, dust and the operating environment affect how work can be undertaken. Do not bypass protective devices or safety interlocks to keep a dryer running.

  • Preparing before harvest

    Planned assessment before the busy season can help identify work and parts requirements. For an urgent fault, call with the dryer make, model, symptoms and location.

Have the dryer make, model and symptoms to hand when you call.

Faults Worth Checking Before Harvest

Planned assessment before the busy season can help identify work and parts requirements. None of the signs below confirms a particular fault, but each is worth raising with James before the dryer is relied on.

  • Starters and contactors

    A motor that hums, starts intermittently or will not start at all can point to a starter, contactor or overload that needs checking. The condition of connections, protective equipment and control circuits may need checking alongside the incoming supply.

  • Control panel and sensors

    A dryer that stops mid-run, a control fault that comes and goes, or a fault indication that clears on reset can involve the control circuits, sensors or interlocks rather than the motor. A fault indication alone does not confirm which component needs replacing.

  • Supply and isolators

    A supply that trips under load, a lost phase, or an isolator that is stiff, damaged or has been bypassed all warrant a look before the dryer is depended on. James investigates the electrical supply and relevant controls within the agreed scope.

  • Cable damage and dust build-up

    Cables chafed by moving parts or rodents, and dust settling inside panels and around motors, can cause faults that only show once the dryer is running hard. Isolation arrangements, moving parts, dust and the operating environment affect how work can be undertaken.

Call 01674 900550Describe what the dryer is doing and James explains what can be checked.

What the Electrical Side of a Dryer Fault Covers

The electrical work on a dryer comes down to three things: finding the fault, checking the starters, controls and supply that feed it, and doing both safely around the machinery.

  • James talking with a homeowner at an open garage

    Fault finding for grain drying equipment

    Loss of power, a motor that will not start or an intermittent control fault can interrupt drying operations. James investigates the electrical supply and relevant controls within the agreed scope. Equipment documentation and a clear account of the fault help guide the investigation.

  • Ceiling lighting in a cattle shed

    Motor starters, controls and supply checks

    The condition of connections, protective equipment and control circuits may need checking alongside the incoming supply. Mechanical faults or manufacturer-specific control systems can require specialist support. A fault indication alone does not confirm which component needs replacing.

  • Closed isolator beside a grain-drying fan

    Safe access around dust and moving machinery

    Isolation arrangements, moving parts, dust and the operating environment affect how work can be undertaken. Agree safe access and coordination with the person responsible for the equipment. Do not bypass protective devices or safety interlocks to keep a dryer running.

How Are Grain Dryer Repairs Priced?

No figures are published for grain dryer work, because the price depends on what the investigation finds. What you can expect:

  • Quote agreed after assessment

    The equipment, access, investigation needed and extent of installation or repair affect the price.

  • Costs agreed before work begins

    James explains the proposed work and any additional costs before you agree to proceed.

  • Specialist support flagged early

    Manufacturer-specific controls or mechanical faults may require specialist support alongside the electrical investigation.

Send the dryer make, model, fault indications and any electrical drawings available. The more James knows before the visit, the more of the investigation can be planned.

Preparing for Harvest & Urgent Faults

Planned assessment before the busy season can help identify work and parts requirements. For an urgent fault, call with the dryer make, model, symptoms and location. Attendance and repair times depend on availability, diagnosis, access and suitable parts; an immediate repair cannot be promised.

What James can promise is a straight answer on the phone: whether a visit is practical, what can be checked on site and what is likely to need a part or specialist support.

Idle dryer? A pre-season check is easier to arrange than a harvest call.
James assessing a workshop with a notebook

On the day

How Is a Grain Dryer Electrical Fault Repaired?

The visit follows the same order whatever the dryer. The electrical work stops where a mechanical fault or a manufacturer-specific control system needs specialist support, and James says so rather than guessing.

  1. 1

    Take the symptoms and dryer details from you

    Make, model, what the dryer does and when it does it, and any electrical drawings you have. Equipment documentation and a clear account of the fault help guide the investigation.

  2. 2

    Isolate and make the machinery safe

    Safe access and coordination are agreed with the person responsible for the equipment before anything is opened. Isolation arrangements, moving parts, dust and the operating environment affect how work can be undertaken.

  3. 3

    Test the supply, starters, controls and sensors

    The incoming supply, isolators, motor starters, contactors, overloads, control circuits and sensors are checked in turn. A fault indication alone does not confirm which component needs replacing.

  4. 4

    Repair or replace the electrical component where agreed

    The findings and the cost are agreed with you first. Some parts are manufacturer-specific and may have to be ordered, and mechanical faults or manufacturer-specific control systems can require specialist support.

  5. 5

    Run up with you and record the work

    The dryer is run up under normal control with you present, the protective devices and interlocks are confirmed to be in service, and the findings and work done are recorded.

On completion

What you are left with

What is handed over depends on whether the work was a repair inside the dryer’s own panel or an alteration to the farm’s fixed wiring.

  • Written note of findings and the work done

    What was found, what was tested, what was replaced and anything left for you to decide on, so the next person to open the panel knows what has been done.

  • Certificate where circuits are altered

    An alteration to an existing circuit, such as a replaced isolator or a repaired supply cable, is recorded on a Minor Electrical Installation Works Certificate with its test results. A new circuit or supply to the dryer is recorded on an Electrical Installation Certificate. A like-for-like component replacement inside the dryer’s panel does not always need a certificate; James says which applies before the work starts.

  • Recommendations for pre-season checks

    Where the investigation shows wear, dust build-up or a part likely to give trouble under load, James notes it so it can be planned for rather than found mid-harvest. These are recommendations, not a guarantee against future faults.

Grain Dryer Electrical Faults Across Angus and the Mearns

James is based in Montrose, Angus, Scotland, and covers arable farms across Angus and the Mearns within an approximate 40-mile radius. Harvest tends to bring several dryer calls at the same time, so attendance depends on availability and current work. Tell him where you are and what the dryer is doing, and he will say what is practical.

  • Montrose and DD10The town, Ferryden and Hillside, and up the coast to St Cyrus. Our base, so usually the quickest to arrange.
  • Brechin and ForfarFarms, grain stores and agricultural businesses across the Angus towns and the countryside between them.
  • ArbroathDryer fault investigations on farms and rural premises, including the surrounding steadings.
  • Laurencekirk and InverbervieEnquiries welcome from farms and agricultural businesses around the city.
  • Elsewhere in Angus and the MearnsDundee and Stonehaven are inside the approximate 40-mile service area. Call with your postcode to check coverage.
Map of the Montrose Sparks service area: about 40 miles around Montrose, across Angus and the Mearns to DundeeNorth Sea10 mi20 mi30 mi40-MILE SERVICE AREABrechinForfarArbroathDundeeKirriemuirLaurencekirkCarnoustieStonehavenInverbervieMontrose

Inside the service area

Brechin

About 7 miles from Montrose, as the crow flies

Call 01674 900550

Frequently Asked Questions About Grain Dryer Electrical Faults

Can’t see your question?

James answers the phone himself and will tell you straight away whether he can help.

Call 01674 900550
Can you guarantee an immediate repair during harvest?

No. Availability, diagnosis and parts affect repair times. Call to discuss the urgency and equipment details so James can explain what assistance is practical.

Why does my grain dryer keep tripping?

There is rarely one answer. A motor overload, a contactor or starter with worn contacts, an earth fault on a cable damaged by moving parts or rodents, a control or sensor fault, or a supply problem such as a lost phase can all trip a dryer, and dust and damp make each of them more likely. Do not keep resetting it to get through the day; repeated tripping is the dryer telling you something is wrong. James tests the supply, starters and controls to find where the trip is coming from.

Can you repair the dryer’s control panel?

The electrical side, yes: contactors, overloads, relays, isolators, wiring and control circuits within the panel. Manufacturer-specific controls or mechanical faults may require specialist support alongside the electrical investigation, and some replacement parts may only be available from the manufacturer. James tells you which it is once the fault has been found.

Should I have the dryer checked before harvest?

It is worth doing. Planned assessment before the busy season can help identify work and parts requirements. A check while the dryer is idle lets the connections, starters, controls and cabling be looked at without pressure, and anything found can be planned for rather than dealt with mid-run. It does not guarantee a fault-free season.

Can you work on a three-phase dryer?

Yes. Most grain dryers run on a three-phase supply, and three-phase motors, starters and distribution are part of the farm electrical work James covers. Where the fault turns out to be in the dryer’s supply, isolator or distribution board rather than the dryer itself, that is handled as three-phase electrical work and quoted in the same way.

What should I do while I wait for an electrician?

Switch the dryer off at its isolator if it is safe to do so, and leave it off. Do not keep restarting it or resetting a breaker that trips straight back, and do not bypass protective devices or safety interlocks to keep a dryer running. Keep people clear of the panel, the fan and the burner. If there is smoke or a smell of burning, keep everyone away and call 999. Have the make, model and symptoms ready for when you speak to James.

Get your grain dryer fault quote

Send the dryer make and model, the fault indications and any electrical drawings you have. James explains the proposed work and any additional costs before you agree to proceed.

James aims to reply within one hour, 8am–6pm.

Tap to call 01674 900550
James Leslie

Get a free quote

Replies within an hour, 8am–6pm.

Emergency or out of hours? Call 01674 900550, 24/7.

No obligation. Costs are agreed before any work begins.