5/5 on Google Reviews

Consumer Unit Replacement & Fuse Box Upgrades in Montrose

Compliant consumer unit replacements and modern fuse box upgrades for homes and commercial premises. Speak to James Leslie directly: he assesses the existing installation and gives you a clear, upfront quote before any work starts.

Call 01674 900550James answers · 24/7 for emergencies
  • Local, Montrose based electrician
  • Metal-clad board with RCBO protection
  • Electrical Installation Certificate issued
  • Costs agreed before work begins
James Leslie

Get your fuse box quote

Emergency or out of hours? Call 01674 900550, 24/7.

No obligation. Costs are agreed before any work begins.

  • 18th EditionBS 7671 Qualified
  • City & Guilds2382-22, Level 3
  • Fully InsuredFor Electrical Work
  • RAF ElectricianElectrical Engineer
  • Ex-Retained FirefighterFire & Rescue Service
The Montrose Sparks van parked in Montrose

Fuse Box Upgrades Across Montrose, Angus

Montrose Sparks is James Leslie, based in Montrose. Old fuse boards turn up all over the town, in closes off the High Street, in terraces near the South Esk and in houses that have had extensions and showers added since the board went in. He covers DD10 and an approximate 40-mile radius.

James does the assessment, the replacement and the certificate. If testing turns up existing wiring faults, he explains them and agrees the scope with you before going any further.

5/5 on Google Reviews

★★★★★Google Review
“He took great care over the work (even used a spirit level to make sure the cooker was sitting right!) and was very reasonably priced. We are new to the area and struck lucky finding a reliable, responsive electrician.”
Donna NZVerified
★★★★★Google Review
“Great service, fast response and problem fixed quickly”
Jen JVerified
★★★★★Google Review
“Great service highly recommended.”
Lee DuncanVerified
★★★★★Google Review
“Jamie arrived within 15 minutes of my call and had the power back on about 10 minutes later.”
megan mcgregorVerified
★★★★★Google Review
“James was very polite and sent over the quote immediately after the call and came out the same day in the early evening.”
SamanthaVerified
★★★★★Google Review
“He couldn't of been more helpful and still only took what he quoted for, even though it was a bigger job than expected. Definitely recommend.”
Tammy CrockattVerified
★★★★★Google Review
“Arrived within an hour of my call, as he said he would. Fixed the problem same afternoon, and rate was extremely reasonable!”
Sarah DundasVerified
★★★★★Google Review
“They also give decent price for the job and the work done will be using James again, he is also very polite and very helpful too me.”
katieVerified
★★★★★Google Review
“Fast response during a weekend, put in a temporary fix so we got power back. Excellent service.”
Ian MilneVerified
★★★★★Google Review
“Very professional and courteous. Highly recommend him.”
BuckyVerified
★★★★★Google Review
“James answered my call late at night and went to my property to investigate even though I had never used him before.”
Mohan ThiagarajahVerified

Why Choose Montrose Sparks for Your Fuse Box Replacement?

  • Montrose Sparks replaces consumer units across Montrose, Angus

    Fuse box and consumer unit replacement for homes, rental properties and commercial premises. James works from Montrose and covers an approximate 40-mile radius.

  • Work is carried out to BS 7671 by an 18th Edition qualified electrician

    James inspects, tests and records every replacement against the 18th Edition wiring regulations and issues an Electrical Installation Certificate for the work.

  • You deal directly with James Leslie, not a call centre

    James answers the phone, does the work and signs it off. He has 40 years of electrical engineering experience across military, municipal and private sectors, and served as an RAF electrical engineer and as a retained firefighter.

  • Montrose Sparks is fully insured and locally based

    James holds public liability insurance for work in domestic, commercial and agricultural properties. Costs are agreed before any work begins.

More about James
James carrying out an electrical inspection at a property
Every circuit tested and recorded before and after the replacement.

When to upgrade

Does Your Fuse Box Need Replacing?

Your consumer unit is the main safety centre of your property’s electrical system. Older boards with rewireable fuses or basic dual-RCD protection often lack the features needed for today’s high-demand appliances, EV chargers or heat pumps. None of the signs below automatically means replacement is necessary — the condition and suitability of the installation determine the work required.

  • Rewireable fuses or no RCD protection

    Older boards often lack the protection expected of a modern installation.

  • Repeated tripping, or unusual noises from the board

    Buzzing, crackling or humming from a fuse board needs urgent assessment.

  • A proposed new high-power circuit

    EV chargers, heat pumps and electric showers change what the board has to carry.

  • An EICR has recommended it

    C1, C2 or FI observations against the board are a common trigger for replacement.

Not sure what you have? Send a photo of the board.

What a Modern Consumer Unit Adds

An older board with rewireable fuses or a single shared RCD cannot offer the protection below. These are the devices a replacement board can carry, and what each one does and does not do.

  • Domestic consumer unit in a utility cupboard

    Metal-Clad Non-Combustible Enclosure

    BS 7671 requires domestic consumer units to have a non-combustible enclosure, or be enclosed in a suitable non-combustible cabinet. Steel is a common solution. This helps limit fire spread but does not eliminate all fire risks.

  • James talking with an older homeowner in her sitting room

    RCBO Individual Circuit Protection

    RCBOs protect separate circuits, so a fault on one circuit can be disconnected without switching off the others sharing an RCD. Other faults or upstream devices can still interrupt a wider supply.

  • James listening to a homeowner while looking around a hallway

    Surge Protection Devices (SPD)

    SPDs can reduce damage from transient overvoltages affecting electronics, boilers, computers and appliances. Their protection has limits and they do not guarantee protection from every surge or lightning event.

Arc Fault Detection Devices (AFDD)

Where required or appropriate, Arc Fault Detection Devices detect certain types of dangerous arcing and disconnect the affected circuit. They supplement other protective measures rather than guaranteeing that a fire cannot occur.

How Much Does a Consumer Unit Replacement Cost?

Prices depend on the number of electrical circuits in your property, earthing and bonding condition, and the protective equipment specified (RCBOs / SPDs). All costs are agreed upon before work begins.

Standard Domestic Consumer Unit ReplacementNumber of circuits (ways), board type, RCBO/SPD protection, earthing bonding. Assessed by reviewing existing fuse board photos or property details.
£550 – £1,000+Typical domestic replacement
Earthing & Main Bonding Upgrades (If Required)Access to main gas and water service pipework for earth bonding. Assessed during the pre-replacement inspection.
Quoted to specAssessed on inspection
Remedial Wiring Repairs (If Faults Found)Pre-existing circuit faults, damaged accessories, or earthing issues. Quoted for your approval following initial testing.
Quoted separatelyAfter initial testing

Indicative guide prices. The final scope and cost are agreed before work begins. If pre-existing wiring faults such as poor earthing or damaged cables are discovered during testing, James explains the findings and agrees any necessary remedial work with you before proceeding.

Full pricing guide

What a Consumer Unit Replacement Involves

Replacing your consumer unit updates the backbone of your electrical installation. It is a systematic electrical procedure that includes testing your property’s existing fixed wiring:

  1. 1

    Pre-Replacement Inspection

    Assessing main earthing, bonding conductors (water and gas services), and existing circuit conditions.

  2. 2

    Safe Power Isolation

    Disconnecting the main electrical supply to safely remove the legacy fuse board.

  3. 3

    New Board Installation

    Mounting the non-combustible enclosure, fitting RCBOs, main switch, and Surge Protection Device (SPD).

  4. 4

    Full Inspection & Circuit Testing

    Testing every circuit for insulation resistance, earth continuity, and correct tripping speeds.

  5. 5

    Certification & Records

    Test results recorded and the paperwork handed over on completion.

A replacement is often planned alongside full or partial rewiring or an electrical safety inspection.

On completion

What you are left with

Paperwork and records handed over when the work is signed off.

  • Electrical Installation Certificate (EIC)

    Official safety documentation confirming compliance with BS 7671 (18th Edition) regulations. Any applicable building warrant or approved certification requirements are assessed separately.

  • Full Circuit Schedule

    Clear, professional labelling on the consumer unit so you know exactly which switch controls each room.

  • Photographic Records & Testing Data

    Complete records of pre- and post-installation tests for your property records.

Consumer Unit Upgrades Across Montrose, Angus

James is based in Montrose, Angus, Scotland, and replaces consumer units across the DD10 postcode district, the Angus towns and the Mearns within an approximate 40-mile radius. Give him your postcode to confirm availability.

  • Montrose and DD10The town, Ferryden and Hillside, and up the coast to St Cyrus. Our base, so usually the quickest to arrange.
  • Brechin and ForfarHomes, rentals and business premises across the Angus towns.
  • ArbroathReplacements and remedial work, including surrounding rural properties.
  • Laurencekirk and InverbervieEnquiries welcome for houses, flats and rented properties.
  • Elsewhere in Angus and the MearnsDundee and Stonehaven are inside the approximate 40-mile service area. Call with your postcode to check coverage.
Map of the Montrose Sparks service area: about 40 miles around Montrose, across Angus and the Mearns to DundeeNorth Sea10 mi20 mi30 mi40-MILE SERVICE AREABrechinForfarArbroathDundeeKirriemuirLaurencekirkCarnoustieStonehavenInverbervieMontrose

Inside the service area

Brechin

About 7 miles from Montrose, as the crow flies

Call 01674 900550

Frequently Asked Questions About Consumer Unit Replacements

Can’t see your question?

James answers the phone himself and will tell you straight away whether he can help.

Call 01674 900550
How do I know if my fuse box needs replacing?

An older fuse box, missing RCD protection, unusual noises, repeated tripping or a proposed new high-power circuit are reasons to arrange an assessment. They do not automatically mean replacement is necessary; the condition and suitability of the installation determine the work required.

How long will the power be off during a fuse box replacement?

Power isolation typically lasts between 4 to 8 hours depending on the number of circuits and the condition of the existing wiring. James will inform you in advance so you can plan around the outage.

Will replacing my fuse box require rewiring my whole house?

Not necessarily. Replacing a consumer unit upgrades the central control board. Testing can reveal existing wiring faults that need attention. James explains any repairs and agrees their scope and cost before proceeding.

Do I get a safety certificate after the replacement?

Yes. You will receive an Electrical Installation Certificate (EIC) recording the installation work, inspection and test results. Its scope and any limitations are stated; it does not certify that every unrelated part of an older installation meets all current requirements.

Get your fuse box quote

Send your address, the problem you are having and how urgent it is. James assesses the earthing and bonding before he confirms a price.

James aims to reply within one hour, 8am–6pm.

Tap to call 01674 900550
James Leslie

Get a free quote

Replies within an hour, 8am–6pm.

Emergency or out of hours? Call 01674 900550, 24/7.

No obligation. Costs are agreed before any work begins.