Kitchen Electrical Upgrades & Cooker Wiring in Montrose
Kitchen electrical alterations, cooker isolator installations, induction hob wiring and socket layout additions in Montrose and across Angus. Speak to James Leslie directly so your kitchen refurbishment is powered safely.
Call 01674 900550James answers · 24/7 for emergencies- Electric cooker and induction hob wiring
- First fix before the units, second fix after the worktops
- Sockets, appliance spurs and kitchen lighting
- Clear quotes agreed before work begins
18th EditionBS 7671 Qualified
City & Guilds2382-22, Level 3
Fully InsuredFor Electrical Work- RAF ElectricianElectrical Engineer
Ex-Retained FirefighterFire & Rescue Service

Kitchen Electrics and Cooker Installation Across Montrose, Angus
Montrose Sparks is James Leslie, based in Montrose. A new kitchen in an older Montrose terrace usually asks more of the wiring than the original one did, and the same goes for cottages in Ferryden and farmhouses out of town. He covers DD10 and an approximate 40-mile radius.
James does the cooker supply, the sockets, the lighting and the certification, timed around your kitchen fitter’s first and second fix. A new dedicated cooker circuit is assessed on the length of the cable run from the consumer unit and on the board’s RCD protection, so an older board may need a consumer unit upgrade first. The kitchen extractor fan comes under extractor fans, and sockets elsewhere in the house under extra sockets.
5/5 on Google Reviews
“He took great care over the work (even used a spirit level to make sure the cooker was sitting right!) and was very reasonably priced. We are new to the area and struck lucky finding a reliable, responsive electrician.”
“Great service, fast response and problem fixed quickly”
“Great service highly recommended.”
“Jamie arrived within 15 minutes of my call and had the power back on about 10 minutes later.”
“James was very polite and sent over the quote immediately after the call and came out the same day in the early evening.”
“He couldn't of been more helpful and still only took what he quoted for, even though it was a bigger job than expected. Definitely recommend.”
“Arrived within an hour of my call, as he said he would. Fixed the problem same afternoon, and rate was extremely reasonable!”
“They also give decent price for the job and the work done will be using James again, he is also very polite and very helpful too me.”
“Fast response during a weekend, put in a temporary fix so we got power back. Excellent service.”
“Very professional and courteous. Highly recommend him.”
“James answered my call late at night and went to my property to investigate even though I had never used him before.”
Why Choose Montrose Sparks for Your Kitchen Electrics?
- Montrose Sparks wires kitchens across Montrose, Angus
Kitchen electrical alterations, cooker isolator installations, induction hob wiring and socket layout additions for homeowners, kitchen fitters and landlords. James works from Montrose and covers an approximate 40-mile radius.
- Work is carried out to BS 7671 by an 18th Edition qualified electrician
Full BS 7671 certification is included. James selects the cable size and protective equipment for the appliance load, the route and the installation conditions.
- You deal directly with James Leslie, not a call centre
There is no office between you and the electrician. James has 40 years of electrical engineering experience across military, municipal and private sectors, including service as an RAF electrical engineer and as a retained firefighter.
- Montrose Sparks is fully insured and locally based
The business carries public liability cover for domestic, commercial and agricultural properties. A clear quote is agreed before work begins.

Cooker and hob supplies
Does Your Cooker Need Its Own Circuit?
Often, but not always: it depends on the appliance kW rating, the condition of the existing cable and whether an isolator switch is already in place. Where a suitable circuit exists, the cooker or hob is connected to it; otherwise a new dedicated cooker circuit is run from the consumer unit. Cable size and protective equipment are selected for the appliance load, route and installation conditions.
A suitable existing cooker circuit
Where the existing circuit, its cable and the isolator switch are in good condition and sized for the appliance, the cooker or hob is connected to it. Appliance kW rating, cable condition and isolator switch presence are what decide this.
No cooker circuit, or one that is not up to the appliance
A new dedicated cooker circuit is run from the consumer unit. It is assessed on the cable run distance from the consumer unit and the board’s RCD protection.
An older consumer unit
A new circuit needs a spare way and suitable RCD protection at the board. Where the board cannot take it, a consumer unit upgrade is explained and quoted before the kitchen work is agreed.
Working with your kitchen fitter
Montrose Sparks serves homeowners, kitchen fitters, and landlords. Alterations are quoted against your kitchen layout plan before fitting starts, covering socket moves, lighting points and cooker switches.
Safe Electrical Layouts for Modern Kitchens
Kitchens are high-demand electrical environments containing multiple high-power appliances—electric cookers, induction hobs, ovens, dishwashers, and washing machines. Proper circuit distribution, dedicated appliance spurs, and RCD shock protection are vital for kitchen safety.

Electric Cooker & Induction Hob Wiring
Installing dedicated cooker and hob supplies, local isolation and suitable connection units. Cable size and protective equipment are selected for the appliance load, route and installation conditions.

Countertop Sockets & Integrated Appliance Spurs
Adding countertop sockets, pop-up power towers, USB charging outlets, and switched fused spurs for integrated dishwashers, microwaves, and under-counter appliances.

Kitchen Lighting & Under-Cabinet LEDs
Installing ambient under-cabinet LED strip lighting, ceiling spotlights, and task lighting to illuminate food preparation areas.
How Much Does Kitchen Electrical Work Cost?
£60 – £150+ to connect a cooker or hob to an existing circuit, £250 – £550+ for a new dedicated cooker circuit, and £500 – £3,000+ for a kitchen electrical alterations package. Clear quotes agreed before work begins.
- Electric Cooker / Hob Connection (Existing Circuit)Appliance kW rating, cable condition, isolator switch presence. Share your cooker specification and existing switch layout.
- £60 – £150+Existing circuit
- New Dedicated Cooker Circuit InstallationCable run distance from consumer unit, board RCD protection. Assessed based on kitchen distance to your main board.
- £250 – £550+New circuit from the consumer unit
- Kitchen Electrical Alterations PackageNumber of socket moves, lighting points, cooker switches. Quoted against your kitchen layout plan before fitting starts.
- £500 – £3,000+Kitchen refurbishment
Indicative guide prices. The final scope and cost are agreed before work begins.
First fix and second fix
What Does the Electrical Work in a Kitchen Refit Involve?
The electrics are done in two visits around the kitchen fitter: the cables go in before the units, and the sockets, switches and appliances are connected once the worktops are on.
- 1
Agree the appliance list and the layout
James goes through the kitchen layout plan with you and your kitchen fitter: which appliances are going in, where the cooker or hob sits, where the sockets and lighting are wanted, and what the existing circuits can carry.
- 2
First fix before the units go in
Cables are run for the cooker supply, the sockets and appliance spurs, the lighting and the extractor fan while the walls and floor are open, so nothing has to be chased out once the kitchen is fitted.
- 3
Consumer unit connections and any new circuits
A new dedicated cooker circuit, or any other new circuit, is connected at the consumer unit with the protective device selected for the load and the cable. Any work the board needs to take it has been agreed beforehand.
- 4
Second fix once the worktops are on
Sockets, switched fused spurs, isolators, the cooker connection unit and the lighting are fitted, and the cooker or hob is connected.
- 5
Test, certify and demonstrate
Every new or altered circuit is tested and the results are recorded on the certificate for the work. James shows you where the cooker switch and the appliance isolators are before leaving.
Where an older kitchen is being stripped back to the walls, the wiring feeding it can be assessed alongside a partial rewire.
On completion
What you are left with
The certificate matches the work: a new circuit is recorded on one form, an alteration to an existing circuit on another.
Electrical Installation Certificate (EIC)
Issued for any new circuit, such as a dedicated cooker circuit run from the consumer unit. It records the design, the inspection and the test results for that circuit. Any applicable building warrant or approved certification requirements are assessed separately.
Minor Electrical Installation Works Certificate
Issued for additions or alterations to an existing circuit: sockets moved or added, a fused spur for an integrated appliance, a cooker connected to a suitable existing circuit or lighting points altered. It records the work and the test results for that circuit.
Appliance connection details and manufacturer instructions
A note of how each cooker, hob or oven was connected and the circuit it is on, with the manufacturer’s installation instructions left with you for the appliance records.
Kitchen Electrical Work Across Montrose, Angus
James is based in Montrose, Angus, Scotland, and covers the DD10 postcode district, the Angus towns and the Mearns within an approximate 40-mile radius. He works alongside kitchen fitters and joiners across the towns, and coordination with other trades is built into the quote. Give him your postcode to confirm availability.
- Montrose and DD10The town, Ferryden and Hillside, and up the coast to St Cyrus. Our base, so usually the quickest to arrange.
- Brechin and ForfarCooker connections, kitchen alterations and refits for homes, rentals and kitchen fitters across the Angus towns.
- ArbroathCooker circuits and kitchen wiring, including surrounding rural properties.
- Laurencekirk and InverbervieEnquiries welcome for houses, flats and rented properties.
- Elsewhere in Angus and the MearnsDundee and Stonehaven are inside the approximate 40-mile service area. Call with your postcode to check coverage.
Frequently Asked Questions About Kitchen Electrics and Cooker Installation
Can’t see your question?
James answers the phone himself and will tell you straight away whether he can help.
Call 01674 900550Can I connect my own electric cooker?
It is safer not to, and the connection itself is only part of the job. A cooker or hob needs a circuit that can carry it, a suitable cooker connection unit and an isolator switch within reach, and the cable, its condition and the protective device at the board all have to be checked against the appliance. James connects the cooker, checks the circuit it is on and records the work on the appropriate certificate.
Does an induction hob need a different supply?
It depends on the hob’s rating. Some induction hobs draw more than the cooker or hob they replace, so the existing circuit, cable and isolator are checked against the manufacturer’s stated rating before it is connected. Where the existing circuit is suitable, the hob is connected to it; where it is not, a new dedicated circuit is run from the consumer unit. James assesses this from the appliance specification you send.
How many sockets should a kitchen have?
There is no fixed number. The layout is planned around the appliances going in, the worktop areas you will use for small appliances and where the integrated appliances need their switched fused spurs. James goes through the kitchen layout plan with you and adds the sockets and spurs the design calls for, with the circuits assessed to carry them.
Do kitchen sockets need to be a certain distance from the sink?
Socket positions in a kitchen are chosen for safety and for the layout, and that includes keeping them clear of the sink and the hob. James positions the sockets on the kitchen plan so they are usable at the worktop without being placed where water or heat could reach them.
When should the electrician come in a kitchen refit?
Twice: a first fix before the units go in and a second fix after the worktops are on. At first fix the cables are run for the cooker, sockets, lighting and extractor while the walls are open; at second fix the sockets, isolators, cooker connection unit and lighting are fitted and the appliances connected. James agrees both visits with you and the kitchen fitter so the electrical work does not hold up the fit.
Do I get a certificate for kitchen electrical work?
Yes. A new circuit, such as a dedicated cooker circuit, is recorded on an Electrical Installation Certificate, and alterations to existing circuits are recorded on a Minor Electrical Installation Works Certificate. Full BS 7671 certification is included, and James supplies the certificate appropriate to the work carried out.
Get your kitchen electrics quote
Tell James what the kitchen needs: a cooker or hob connection, a new dedicated circuit, sockets, spurs or lighting. Send your cooker specification and existing switch layout, or the kitchen layout plan, and he prepares the quote against it before fitting starts.
James aims to reply within one hour, 8am–6pm.