Bathroom Extractor Fan Installation & Repair in Montrose
Extractor fan installations, timer fan replacements and bathroom ventilation wiring in Montrose and across Angus, to prevent dampness, humidity and mold growth. Speak to James Leslie directly about sorting out a ventilation problem.
Call 01674 900550James answers · 24/7 for emergencies- Ventilation that tackles condensation and damp
- Humidity-sensing and timer extractor fans
- Inline loft extractor fan systems
- Costs agreed before work begins
18th EditionBS 7671 Qualified
City & Guilds2382-22, Level 3
Fully InsuredFor Electrical Work- RAF ElectricianElectrical Engineer
Ex-Retained FirefighterFire & Rescue Service

Bathroom Extractor Fans Across Montrose, Angus
Montrose Sparks is James Leslie, based in Montrose. Condensation is a familiar problem in a coastal town, in stone-built houses near the High Street as much as in newer homes, and he fits and repairs bathroom fans across DD10 and an approximate 40-mile radius.
This page is about bathroom fans: swapping a fan that has failed, fitting a new inline system for a bathroom under the loft, or adding a timer or humidity control to what is already there. A simple fan swap can be booked along with other small electrical repairs. A fan that has stopped for no obvious reason may need electrical fault finding first. Cooker hoods and other kitchen electrics come under kitchen electrics and cooker installation.
5/5 on Google Reviews
“He took great care over the work (even used a spirit level to make sure the cooker was sitting right!) and was very reasonably priced. We are new to the area and struck lucky finding a reliable, responsive electrician.”
“Great service, fast response and problem fixed quickly”
“Great service highly recommended.”
“Jamie arrived within 15 minutes of my call and had the power back on about 10 minutes later.”
“James was very polite and sent over the quote immediately after the call and came out the same day in the early evening.”
“He couldn't of been more helpful and still only took what he quoted for, even though it was a bigger job than expected. Definitely recommend.”
“Arrived within an hour of my call, as he said he would. Fixed the problem same afternoon, and rate was extremely reasonable!”
“They also give decent price for the job and the work done will be using James again, he is also very polite and very helpful too me.”
“Fast response during a weekend, put in a temporary fix so we got power back. Excellent service.”
“Very professional and courteous. Highly recommend him.”
“James answered my call late at night and went to my property to investigate even though I had never used him before.”
Why Choose Montrose Sparks for Your Extractor Fan?
- Montrose Sparks installs extractor fans across Montrose, Angus
Extractor fan installations, timer fan replacements and bathroom ventilation wiring for domestic properties and rental homes. James works from Montrose and covers an approximate 40-mile radius.
- Work is carried out to BS 7671 by an 18th Edition qualified electrician
The wiring regulations treat a bathroom as a special location. James assesses the fan, its isolator and the ducting route together, and fits triple-pole isolator switches outside the bathroom zones so the fan can be maintained and cleaned safely.
- You deal directly with James Leslie, not a call centre
The person you speak to is the person who turns up. James served as an RAF electrical engineer and as a retained firefighter, and has 40 years of electrical engineering experience across military, municipal and private sectors.
- Montrose Sparks is fully insured and locally based
Public liability insurance is in place for domestic, commercial and agricultural properties. Costs are agreed before any work begins.

Condensation and damp
Do I Need an Extractor Fan in My Bathroom?
Suitable ventilation forms part of a healthy home; the required solution depends on the room and property. We install extractor fans tailored to your bathroom layout.
Condensation, damp plasterwork or mould after showers
Excess humidity from showers and baths can damage plasterwork and encourage mould. Steam that lingers on the window and walls long after a shower is the usual first sign.
A bathroom with no window, or one that is rarely opened
A room with no opening window has no other way to shed moisture, and even where there is one, opening it in winter is not a habit most households keep. Mechanical extraction gives the room a way to clear.
An existing fan that has failed, is noisy or no longer clears the steam
Fans wear out, ducting can sag or block, and a fan that runs but shifts little air may be undersized or choked with dust. A like-for-like replacement is priced on the existing wiring, ducting state and the fan model chosen.
A fan that should run with the light or when it senses moisture
Automatic fans turn on with the light switch or detect moisture levels to clear steam efficiently, so the room is ventilated without anyone remembering to switch a fan on.
Like-for-Like Replacement or a New Inline Loft System?
Most bathroom fan jobs take one of two shapes. Which one suits yours depends on the room and property: what is already fitted, where the bathroom sits, and how much moisture the room has to shed.

Option one
Like-for-like replacement
The existing fan is removed and a new unit fitted in the same position, reusing the wiring and ducting where they are in sound condition. The price depends on the existing wiring, ducting state and the fan model chosen. Share existing fan symptoms and room access.
A timer or humidity-sensing model can usually be chosen at this point, and the isolator is checked or added, so a replacement is a good moment to improve on what was there.
Best when: the current fan has failed or is noisy, the ducting is sound, and the room cleared reasonably well when the fan worked.

Option two
New inline loft extractor system
The fan sits in the loft rather than in the room, with a ceiling valve below it and ducting to a roof or soffit outlet. Because the motor is away from the bathroom, the fan is quieter in use and can move more air than a small wall or ceiling unit.
The price is set by ducting run length, external core drilling and ceiling access, and is assessed based on bathroom location relative to loft/outer wall.
Best when: the bathroom sits below the loft, there is no fan or the existing one cannot keep up, or a quieter fan is wanted.
Whichever option fits, the fan is only part of the picture. Ducting that is kinked, uninsulated or too long, an outlet flap that has stuck shut, or a door with no gap beneath it for replacement air can all leave a working fan struggling. James looks at the whole route from grille to outside, not just the fan on the wall.

Humidity-sensing & timer extractor fans
Installing automatic fans that turn on with light switches or detect moisture levels to clear steam efficiently.

Inline loft extractor fans
High-power fan units mounted inside loft spaces above bathrooms for ultra-quiet operation and direct external roof/soffit venting.

Isolation switch installation
Fitting triple-pole isolator switches outside bathroom zones for safe fan maintenance and cleaning.
How Much Does an Extractor Fan Cost?
A like-for-like extractor fan replacement is £80 – £180+; a new inline loft extractor fan system is £220 – £450+. All costs are agreed before work begins.
- Like-for-Like Extractor Fan ReplacementExisting wiring, ducting state, fan model chosen. Share existing fan symptoms and room access.
- £80 – £180+Like-for-like replacement
- New Inline Loft Extractor Fan SystemDucting run length, external core drilling, ceiling access. Assessed based on bathroom location relative to loft/outer wall.
- £220 – £450+New inline loft system
Indicative guide prices. The final scope and cost are agreed before work begins.
What Does an Extractor Fan Installation Involve?
The same sequence applies to a swap and to a new inline system; the difference is how much of it there is to do.
- 1
Assess the room, the humidity source and the existing wiring
James looks at where the steam comes from, where the fan and outlet can go, and what wiring, ducting and isolator are already there. For a new inline system, where the bathroom sits relative to the loft or outer wall decides the duct route.
- 2
Isolate the circuit
The circuit feeding the fan is switched off at the consumer unit and proved dead before any cover comes off. Where the fan is fed from the lighting circuit, the bathroom light is off while the work is done.
- 3
Fit or replace the fan and ducting
The old fan is removed, or a new hole cored and a ceiling valve or wall grille fitted. Ducting is run as short and straight as the building allows to a roof, soffit or wall outlet, with insulated ducting through a cold loft to limit condensation forming inside the duct.
- 4
Connect the isolator and controls
The fan is wired through a triple-pole isolator outside the bathroom zones, and the timer or humidistat is set up to suit the room: a timed overrun after the light goes off, or a humidity threshold that starts the fan on its own.
- 5
Test and demonstrate
The fan is run, the airflow at the grille and the outlet checked, the isolator and any overrun or humidity setting tested, and the results recorded. James shows you how the control works and what to do if the fan runs longer or shorter than expected.
Where a fan has stopped and the cause is not obvious, fault finding comes first, so a working fan is not replaced for no reason.
On completion
What you are left with
Paperwork and records handed over when the work is signed off.
Minor Electrical Installation Works Certificate
Issued for a like-for-like fan swap or another alteration to an existing circuit, recording the inspection and test results for the work.
Electrical Installation Certificate (EIC)
Issued where a new circuit or supply is added for the fan, confirming the work against BS 7671 (18th Edition). Any applicable building warrant or approved certification requirements are assessed separately.
Manufacturer instructions and settings
The fan’s instructions handed over, with the timer or humidity setting noted so it can be adjusted or the fan cleaned later without guesswork.
Bathroom Extractor Fans Across Montrose, Angus
Bathrooms in older stone houses and in new builds, in town-centre flats and in rural properties. James is based in Montrose, Angus, Scotland, and covers the DD10 postcode district, the Angus towns and the Mearns within an approximate 40-mile radius. Give him your postcode to confirm availability.
- Montrose and DD10The town, Ferryden and Hillside, and up the coast to St Cyrus. Our base, so usually the quickest to arrange.
- Brechin and ForfarBathroom fans for homes and rental properties across the Angus towns.
- ArbroathReplacements and new inline loft systems, including surrounding rural properties.
- Laurencekirk and InverbervieEnquiries welcome for houses, flats and rented properties.
- Elsewhere in Angus and the MearnsDundee and Stonehaven are inside the approximate 40-mile service area. Call with your postcode to check coverage.
Bathroom Extractor Fans: Common Questions
Can’t see your question?
James answers the phone himself and will tell you straight away whether he can help.
Call 01674 900550Do I need an electrician to replace a bathroom extractor fan?
In most cases, yes. A bathroom fan is part of the fixed wiring in a room where water is present, and the wiring regulations treat bathrooms as a special location, so the work should be carried out and tested by a qualified electrician. Even a like-for-like swap means working on a circuit and confirming the isolator and connections are sound. James fits the fan, tests it and issues a Minor Electrical Installation Works Certificate for the work.
Why is my extractor fan not clearing the steam?
Usually because the fan is too small for the room, the ducting is long, kinked or blocked, or the fan is choked with dust and moving far less air than it should. A fan also needs replacement air to pull in, so a tight-fitting door with no gap beneath it can stall it. The required solution depends on the room and property; James checks the fan, the duct run and the outlet before recommending a replacement or an inline system.
Can an extractor fan be fitted where there is no window?
Yes. A windowless bathroom is where a fan matters most, and there is usually a route out: through the ceiling into the loft and out through the roof or soffit with an inline fan, or through an outside wall with a cored hole and a wall fan. The best route depends on where the bathroom sits relative to the loft or outer wall, which is what James assesses first.
Where should the isolator switch be?
Outside the bathroom zones, typically just outside the door or in the hallway, where it can be reached without standing in the wet area. A triple-pole isolator lets the fan be switched off completely for cleaning or maintenance, including a timer fan that would otherwise keep running after the light is off. If your fan has no isolator, one can be added as part of a replacement.
Can the fan run on a timer or humidity sensor?
Yes. A timer fan starts with the bathroom light and keeps running for a set overrun after the light goes off, which gives the room time to clear. A humidity-sensing fan switches itself on when moisture rises and off again when it falls, whether or not the light is on. Either control is set up at installation and James explains how to adjust it.
Will a new fan stop black mould?
A working fan removes the moisture that mould needs, so it deals with the usual cause, but it does not guarantee that existing mould disappears or that none forms in a cold, poorly insulated corner. Excess humidity from showers and baths can damage plasterwork and encourage mould. Existing growth still needs cleaning, and where the underlying cause is a leak or a cold spot rather than steam, that needs addressing separately. James can advise on whether ventilation is the right fix for the room.
Get your extractor fan quote
Say whether you want a replacement or a new fan, what the existing fan is doing and where the bathroom sits in relation to the loft or an outside wall. Mention the existing fan’s symptoms and how the room is reached.
James aims to reply within one hour, 8am–6pm.