5/5 on Google Reviews

Electric Shower Installation in Montrose

Help with shower electrical faults, isolator switches and the supply for a replacement shower. James checks what the job needs before you commit to a new unit.

Call 01674 900550James answers · 24/7 for emergencies
  • Faults, isolators and replacement supplies
  • The cable, breaker and isolator checked first
  • Costs agreed before work begins
  • Testing and electrical records included
James Leslie

Get your electric shower quote

Emergency or out of hours? Call 01674 900550, 24/7.

No obligation. Costs are agreed before any work begins.

  • 18th EditionBS 7671 Qualified
  • City & Guilds2382-22, Level 3
  • Fully InsuredFor Electrical Work
  • RAF ElectricianElectrical Engineer
  • Ex-Retained FirefighterFire & Rescue Service
The Montrose Sparks van parked in Montrose

Shower Electrical Work in Montrose, Angus

Montrose Sparks is James Leslie, based in Montrose. Shower jobs come up in every kind of house in the town, from flats off the High Street to family homes at Borrowfield, and he covers the rest of DD10 and an approximate 40-mile radius as well.

A shower circuit is one of the heavier loads in a home. A more powerful unit can therefore be the reason a consumer unit upgrade is needed, and a shower that trips or will not start can point to a fault beyond the shower circuit that needs electrical fault finding. Bathroom ventilation is a separate job, covered under Bathroom & Kitchen Extractor Fans.

5/5 on Google Reviews

★★★★★Google Review
“He took great care over the work (even used a spirit level to make sure the cooker was sitting right!) and was very reasonably priced. We are new to the area and struck lucky finding a reliable, responsive electrician.”
Donna NZVerified
★★★★★Google Review
“Great service, fast response and problem fixed quickly”
Jen JVerified
★★★★★Google Review
“Great service highly recommended.”
Lee DuncanVerified
★★★★★Google Review
“Jamie arrived within 15 minutes of my call and had the power back on about 10 minutes later.”
megan mcgregorVerified
★★★★★Google Review
“James was very polite and sent over the quote immediately after the call and came out the same day in the early evening.”
SamanthaVerified
★★★★★Google Review
“He couldn't of been more helpful and still only took what he quoted for, even though it was a bigger job than expected. Definitely recommend.”
Tammy CrockattVerified
★★★★★Google Review
“Arrived within an hour of my call, as he said he would. Fixed the problem same afternoon, and rate was extremely reasonable!”
Sarah DundasVerified
★★★★★Google Review
“They also give decent price for the job and the work done will be using James again, he is also very polite and very helpful too me.”
katieVerified
★★★★★Google Review
“Fast response during a weekend, put in a temporary fix so we got power back. Excellent service.”
Ian MilneVerified
★★★★★Google Review
“Very professional and courteous. Highly recommend him.”
BuckyVerified
★★★★★Google Review
“James answered my call late at night and went to my property to investigate even though I had never used him before.”
Mohan ThiagarajahVerified

Why Choose Montrose Sparks for Electric Shower Electrical Work?

  • Montrose Sparks carries out electric shower electrical work across Montrose, Angus

    Shower electrical faults, isolator switches and the supply for a replacement shower. James works from Montrose and serves homes, farms and businesses across Angus and surrounding areas within approximately 40 miles.

  • Work is carried out to BS 7671 by an 18th Edition qualified electrician

    Testing and the appropriate electrical records are part of the agreed electrical work. If there are signs of overheating, burning or damaged wiring, they need attention before the shower is used again.

  • You deal directly with James Leslie, not a call centre

    Your call goes to James Leslie in Montrose. He is a former RAF electrical engineer and former retained firefighter with 40 years of electrical engineering experience.

  • Montrose Sparks is fully insured and locally based

    Public liability insurance is in place for domestic, commercial and agricultural properties. Costs are agreed before any work begins.

More about James
James carrying out an electrical inspection at a property
Small jobs are welcome, with clear explanations and costs agreed before work begins.

Before you buy

Can I Replace My Shower With a More Powerful Model?

Only if the existing circuit can take it. The existing cable, protective device and installation conditions need assessment first. Do not assume a higher-powered shower is suitable because the old unit fitted in the same place. Confirm the model before purchase so any circuit alterations can be included in the quote.

  • Cable size and protective device rating

    A shower that fits the same space may draw more from the circuit than the old unit. The cable and the breaker or fuse feeding it have to be suitable for the new rating, and James checks both before the shower is bought.

  • The isolator switch

    The switch that isolates the shower needs to be suitable for the load and in working order. A worn or heat-marked isolator is checked and replaced where the assessment calls for it.

  • Earthing and bonding in the bathroom

    The condition of the earthing and any bonding connections in the bathroom forms part of the assessment. Any shortcomings are explained and agreed with you before the work goes ahead.

  • Plumbing and making good

    The water side is a separate job. Agree with James who will carry out the water connections, any plumbing alterations and making good before the visit, so the quote covers what you expect it to.

Found a model? Send the make, model and rating before you buy.

What Electric Shower Electrical Work Covers

The three things James is asked about most: a shower that has stopped, a replacement that is more powerful than the old one, and who does what when a plumber is involved.

  • Bathroom pull-cord switch

    Shower supply faults and isolator repairs

    A shower that will not start may have a supply, control or appliance fault. James investigates the electrical side, including the isolation switch and connections where appropriate. Signs of overheating, burning or damaged wiring need attention before the shower is used again.

  • James looking around a finished bathroom

    Choosing a replacement electric shower

    A replacement that fits the same space may have a different electrical rating. Cable size, installation conditions, protective equipment and the existing supply all affect suitability. Confirm the model before purchase so any circuit alterations can be included in the quote.

  • James listening to a homeowner while looking around a hallway

    Electrical work and plumbing coordination

    Agree who will carry out the water connections, any plumbing alterations and making good. Electrical investigation does not automatically include replacing the shower or resolving a water-pressure problem. Testing and the appropriate electrical records form part of the agreed electrical work.

How Is Shower Electrical Work Priced?

No two shower jobs are the same, so the price follows the assessment rather than a fixed menu.

  • Quote agreed after assessment

    The equipment, access, investigation needed and extent of installation or repair affect the price.

  • Costs explained before you agree to proceed

    James explains the proposed work and any additional costs before you agree to proceed.

  • Circuit changes and plumbing agreed explicitly

    A higher-rated shower may need changes to the existing circuit. Plumbing alterations, water faults and making good need to be agreed explicitly rather than assumed to be included.

For guide figures across services, see the pricing guide. Where the protective device or consumer unit needs changing, see Fuse Box & Consumer Unit Upgrades.

Preparing for a Visit

Send the make, model and rating of the shower and describe the symptoms. Photographs can help if taken safely without opening covers. Stop using equipment that shows signs of damage, and do not repeatedly reset a protective device that trips when the shower runs.

Send the make, model and rating and James will quote the work.
James looking at the controls of a finished electric shower

What Does Electric Shower Electrical Work Involve?

Whether the shower has stopped or is being replaced, the sequence is the same: check what the circuit can take before anything is connected.

  1. 1

    Confirm the rating and inspect the circuit

    James confirms the rating of the shower you have or want, then inspects the existing cable, the isolator and the breaker or fuse at the consumer unit to see whether they are suitable for it.

  2. 2

    Isolate the supply

    The shower circuit is switched off and proved dead before any cover is removed or connection touched.

  3. 3

    Upgrade the cable, breaker or isolator where needed

    Where the assessment shows the existing cable, protective device or isolator is not suitable for the shower, it is replaced or upgraded as agreed in the quote. Nothing is changed that the assessment does not require.

  4. 4

    Connect the shower unit

    The electrical connection to the shower is made and secured. Where a plumber is fitting the unit, agree who will carry out the water connections, any plumbing alterations and making good, so the two visits line up.

  5. 5

    Test and demonstrate the isolator

    The circuit is tested and the results recorded. James then shows you where the isolator is and how to switch the shower off at the wall or pull-cord before handing over.

A shower that trips the board, or a fault that is not limited to the shower circuit, is dealt with under Electrical Repairs & Fault Finding.

On completion

What you are left with

Testing and the appropriate electrical records form part of the agreed electrical work.

  • Electrical Installation Certificate (EIC)

    Issued for a new shower circuit, or where the existing circuit is upgraded to take a more powerful shower. Any applicable building warrant or approved certification requirements are assessed separately.

  • Minor Electrical Installation Works Certificate

    Issued for a like-for-like connection or an isolator repair on the existing circuit, where the circuit itself is not altered.

  • Test results for the shower circuit

    The inspection and test results recorded for the circuit, kept with the certificate for your property records and any future inspection.

Electric Shower Electrical Work Across Montrose, Angus

Shower faults, isolator repairs and the supply for a replacement shower. James is based in Montrose, Angus, Scotland, and covers the DD10 postcode district, the Angus towns and the Mearns within an approximate 40-mile radius. Give him your postcode to confirm availability.

  • Montrose and DD10The town, Ferryden and Hillside, and up the coast to St Cyrus. Our base, so usually the quickest to arrange.
  • Brechin and ForfarHomes, rentals and business premises across the Angus towns.
  • ArbroathShower faults, isolators and replacement supplies, including surrounding rural properties.
  • Laurencekirk and InverbervieEnquiries welcome for houses, flats and rented properties.
  • Elsewhere in Angus and the MearnsDundee and Stonehaven are inside the approximate 40-mile service area. Call with your postcode to check coverage.
Map of the Montrose Sparks service area: about 40 miles around Montrose, across Angus and the Mearns to DundeeNorth Sea10 mi20 mi30 mi40-MILE SERVICE AREABrechinForfarArbroathDundeeKirriemuirLaurencekirkCarnoustieStonehavenInverbervieMontrose

Inside the service area

Brechin

About 7 miles from Montrose, as the crow flies

Call 01674 900550

Frequently Asked Questions About Electric Shower Electrical Work

Can’t see your question?

James answers the phone himself and will tell you straight away whether he can help.

Call 01674 900550
Can I replace my shower with a more powerful model?

The existing cable, protective device and installation conditions need assessment first. Do not assume a higher-powered shower is suitable because the old unit fitted in the same place. Confirm the model before purchase so any circuit alterations can be included in the quote.

Why has my electric shower stopped working?

It could be the supply, the isolator or the shower unit itself, and the symptoms alone rarely say which. A tripped breaker, a worn pull-cord switch or a fault inside the unit can all leave a shower dead. James investigates the electrical side, including the isolation switch and connections where appropriate. Stop using equipment that shows signs of damage, and do not repeatedly reset a protective device that trips when the shower runs.

Can a plumber fit an electric shower?

A plumber can deal with the water side, but the electrical connection and the check on the circuit feeding it are electrical work. Many replacements involve both trades, so agree who will carry out the water connections, any plumbing alterations and making good before the visit. James coordinates the electrical work with your plumber where that is arranged.

Does an electric shower need its own circuit?

Normally, yes. An electric shower is usually supplied by a dedicated circuit from the consumer unit with its own protective device and isolator. Whether the existing circuit is suitable for the shower you want is assessed before anything is fitted, and any change to the circuit is included in the quote.

Where should the shower isolator be?

Outside the bathroom zones, or as a ceiling pull-cord within the room, so it can be reached without touching the shower. The position depends on the bathroom layout and where the existing circuit runs. James confirms the location during the assessment and shows you how it works at handover.

Do I get a certificate when a shower is fitted?

Yes. A new or upgraded shower circuit is recorded on an Electrical Installation Certificate, and a like-for-like connection or isolator repair on the existing circuit is recorded on a Minor Electrical Installation Works Certificate. Testing and the appropriate electrical records form part of the agreed electrical work.

Get your electric shower quote

Send the make, model and rating of the shower and say what it is doing. Photographs help if you can take them safely without opening any covers.

James aims to reply within one hour, 8am–6pm.

Tap to call 01674 900550
James Leslie

Get a free quote

Replies within an hour, 8am–6pm.

Emergency or out of hours? Call 01674 900550, 24/7.

No obligation. Costs are agreed before any work begins.