Shop Fitting & Commercial Electrician in Montrose
Commercial electrical installations, shop fitting wiring, display lighting and sub-main power distribution in Montrose and across Angus. Speak to James Leslie directly about a practical electrical design for your premises.
Call 01674 900550James answers · 24/7 for emergencies- Local, Montrose based electrician
- Planned around the fitter’s programme
- Tested and certified before you open
- Costs agreed before work begins
18th EditionBS 7671 Qualified
City & Guilds2382-22, Level 3
Fully InsuredFor Electrical Work- RAF ElectricianElectrical Engineer
Ex-Retained FirefighterFire & Rescue Service

Shop Fitting & Commercial Electrical Work Across Montrose, Angus
Montrose Sparks is James Leslie, based in Montrose. The High Street is wide and lined with older buildings, so a shop fit-out there often means working a modern layout into an old unit. He takes on commercial work across DD10 and an approximate 40-mile radius.
James does the layout, the wiring, the distribution board and the certificate, planned around your fitter’s programme and your opening date. Where kitchen or workshop equipment needs a larger supply, that is quoted as three-phase electrical work. Once you are trading, the fixed installation is inspected under Commercial EICRs & Emergency Lighting and plug-in equipment under Portable Appliance Testing.
5/5 on Google Reviews
“He took great care over the work (even used a spirit level to make sure the cooker was sitting right!) and was very reasonably priced. We are new to the area and struck lucky finding a reliable, responsive electrician.”
“Great service, fast response and problem fixed quickly”
“Great service highly recommended.”
“Jamie arrived within 15 minutes of my call and had the power back on about 10 minutes later.”
“James was very polite and sent over the quote immediately after the call and came out the same day in the early evening.”
“He couldn't of been more helpful and still only took what he quoted for, even though it was a bigger job than expected. Definitely recommend.”
“Arrived within an hour of my call, as he said he would. Fixed the problem same afternoon, and rate was extremely reasonable!”
“They also give decent price for the job and the work done will be using James again, he is also very polite and very helpful too me.”
“Fast response during a weekend, put in a temporary fix so we got power back. Excellent service.”
“Very professional and courteous. Highly recommend him.”
“James answered my call late at night and went to my property to investigate even though I had never used him before.”
Why Choose Montrose Sparks for Your Shop Fit-Out?
- Montrose Sparks carries out shop fitting and commercial electrical work across Montrose, Angus
Commercial electrical installations, shop fitting wiring, display lighting and sub-main power distribution for retail shops, cafes, offices and commercial units. James works from Montrose and covers an approximate 40-mile radius.
- Work is carried out to BS 7671 by an 18th Edition qualified electrician
Commercial wiring is designed for reliability, energy efficiency and compliance and quoted against store layout drawings or a site survey. An Electrical Installation Certificate is issued for the new circuits.
- You deal directly with James Leslie, not a call centre
There is no office between you and the electrician. James has 40 years of electrical engineering experience across military, municipal and private sectors, including service as an RAF electrical engineer and as a retained firefighter.
- Montrose Sparks is fully insured and locally based
The business carries public liability cover for domestic, commercial and agricultural properties. Costs are agreed before any work begins.

Before the fit-out starts
What Electrical Work Does a Shop Fit-Out Need?
Most small fit-outs need four things from the electrician: a lighting layout, power where the till, displays and equipment will sit, a supply large enough for anything heavy, and testing and certification before the doors open. How much each involves depends on the premises and what is already there, which is why quotes are prepared against store layout drawings or a site survey.
The lighting layout
Track, display and general lighting positioned from your drawings so the shopfront, the displays and the customer space read as intended.
Sockets, till and display power
Outlets where the till, displays, fridges and office equipment will actually sit, rather than where the last tenant left them.
Three-phase or larger loads
Commercial kitchens, air conditioning and heavier machinery may need a 3-phase board or a larger supply, which is checked before the quote is fixed.
Testing and certification before opening
New circuits and alterations are inspected and tested, and an Electrical Installation Certificate is issued for the work so the paperwork is ready when the premises open.
Practical Electrical Layouts for Retail & Commercial Spaces
Whether refitting a high-street shop, updating an office layout, or outfitting a hospitality venue, we deliver commercial wiring solutions designed for reliability, energy efficiency, and compliance.

Display & Retail Track Lighting
Accent spotlighting, window display illumination, commercial LED panels, and mood lighting for customer spaces.

POS & Office Power Layouts
Floor box sockets, dado trunking, dedicated server power spurs, and till point supplies.

3-Phase Commercial Boards
Installing and balancing 3-phase distribution boards for heavy commercial machinery, air conditioning units, or commercial kitchens.
How Much Does Shop Fitting & Commercial Electrical Work Cost?
A small commercial fit-out or alteration is £800 – £4,000+, quoted against store layout drawings or site survey. All costs are agreed before work begins.
- Small Commercial Fit-Out / AlterationScope of wiring changes, lighting layout, 3-phase needs. Quoted against store layout drawings or site survey.
- £800 – £4,000+Small fit-out or alteration
Indicative guide prices. The final scope and cost are agreed before work begins.
What Does the Electrical Work on a Shop Fit-Out Involve?
On a fit-out the electrical work runs in two passes around the joiners and the decorators, with the board and the testing in between:
- 1
Agree the layout
Lighting, socket and equipment positions are agreed from your drawings and the fitter’s programme, so the first fix goes in before anything closes up.
- 2
First fix
Containment and cables are run to every lighting, socket and equipment position while the ceilings and walls are still open.
- 3
Distribution board and circuits
The distribution board is fitted or altered and the new circuits connected, including a 3-phase board where the equipment needs one.
- 4
Second fix
Once the shopfit is in, the lighting, sockets, signage supplies and, where included, emergency lighting are fitted and connected.
- 5
Test, certify and hand over
Every new circuit is inspected and tested, the Electrical Installation Certificate is completed and the paperwork handed over so it is ready before the premises open.
On completion
What you are left with
The paperwork a landlord, insurer or fire risk assessor may ask for, handed over when the work is signed off.
Electrical Installation Certificate (EIC)
Records the new circuits and alterations with their inspection and test results, confirming the work was carried out to BS 7671 (18th Edition). Any applicable building warrant or approved certification requirements are assessed separately.
Distribution board schedule
A labelled schedule at the board showing which circuit feeds the lighting, the till, the kitchen and the rest of the premises, so the next trade or tenant is not guessing.
Emergency lighting certificate
Where emergency lighting is included in the agreed scope, a completion certificate for that installation is provided alongside the EIC.
Once the premises are trading
The fit-out certificate covers the new work on the day it is signed off. Periodic inspection of the fixed installation and routine emergency lighting testing are carried out under Commercial EICRs & Emergency Lighting.
Shop Fit-Outs Across Montrose, Angus
High-street units, cafés, salons, farm shops and small workshops in the Angus towns and the Mearns. James is based in Montrose, Angus, Scotland, and covers the DD10 postcode district within an approximate 40-mile radius. Give him your postcode and your opening date to confirm availability.
- Montrose and DD10The town, Ferryden and Hillside, and up the coast to St Cyrus. Our base, so usually the quickest to arrange.
- Brechin and ForfarRetail shops, cafes, offices and commercial units across the Angus towns.
- ArbroathFit-outs and alterations, including farm shops and rural business premises.
- Laurencekirk and InverbervieEnquiries welcome for shops, offices and hospitality venues.
- Elsewhere in Angus and the MearnsDundee and Stonehaven are inside the approximate 40-mile service area. Call with your postcode to check coverage.
Frequently Asked Questions About Shop Fit-Out Electrics
Can’t see your question?
James answers the phone himself and will tell you straight away whether he can help.
Call 01674 900550Do I need an electrician for a shop refit?
For anything beyond moving plug-in equipment, yes. New circuits, a new lighting layout and any alteration to the existing wiring need to be designed, installed, inspected and tested to BS 7671, and the work is certified so you have the paperwork for your landlord and insurer. James quotes against your layout drawings or a site survey so the electrical scope is agreed before the fitter starts.
Can you work around my opening hours?
Where the premises are already trading, the work is planned with you around the hours the shop is open and the parts of the premises that need to stay live. What is possible depends on the scope, the layout and where the board sits, so it is agreed as part of the quote rather than promised in advance.
Does a shop need emergency lighting?
It depends on the premises and on its fire risk assessment. Many small commercial units need some emergency lighting on the escape routes, and larger or more complex premises need more, but the requirement comes from the assessment for your building rather than from a fixed rule for shops. Where emergency lighting is part of the agreed scope it is installed and certified with the fit-out, and its routine testing is covered under Commercial EICRs & Emergency Lighting.
Can you fit a three-phase supply for kitchen equipment?
Often, yes, but it depends on the supply the premises already has. Commercial kitchens, air conditioning units and heavier machinery may need a 3-phase distribution board, and where the incoming supply is single-phase a larger connection may involve an application to the network operator, which is assessed before the quote is fixed. Boards and supplies on their own are covered under Three-Phase Electrical Work.
Will I get a certificate to give my landlord or insurer?
Yes. An Electrical Installation Certificate (EIC) is issued for the new circuits and the board, recording the inspection and test results for the work. It covers the work described on it; it does not certify unrelated parts of an older installation, which are inspected separately under an EICR.
Do you do the electrics for signage and shopfront lighting?
Window display illumination is part of the lighting work described above, and external signage supplies and shopfront lighting can be included in the agreed scope. Tell James what the sign maker needs at the quote stage so the supply and its switching are run in at first fix rather than added afterwards.
Get your shop fitting quote
Say what the premises are, what the fit-out or alteration involves, when you hope to open and whether you have layout drawings. James prepares the quote against store layout drawings or a site survey.
James aims to reply within one hour, 8am–6pm.